Product Price Quantity Total
× Abarth with tricolor lightining bolt enamel emblem Art. 0516 Abarth with tricolor lightining bolt enamel emblem 19,50€
19,50€
× NANNI dynamo pulley. Art. 0204 NANNI dynamo pulley. 88,75€
88,75€
× Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts. Art. 0073 Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts. 119,50€
239,00€
× Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. Art. 0472 Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. 98,00€
98,00€
× Twin-choke horizontal Weber 40 DCOE carburettor. Art. 0160 Twin-choke horizontal Weber 40 DCOE carburettor. 499,00€
499,00€
× Giannini diameter 52 mm. new oil temperature black gauge. Art. 0772G Giannini diameter 52 mm. new oil temperature black gauge. 49,50€
49,50€
× Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. Art. 0288B Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 13,00€
13,00€

You may be interested in…

Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0467 - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm. - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.
Art. 0467

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Original price was: 80,00€.Current price is: 49,00€.

In Stock

Add to cart
Art. 0468 - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.
Art. 0468

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring.

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.

16,00€

In Stock

Add to cart
Art. 0328 - Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. - Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).
Art. 0328

Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.

Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).

Original price was: 690,00€.Current price is: 339,00€.

In Stock

Add to cart
Art. 0329 - Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). - Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.
Art. 0329

Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).

Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.

Original price was: 800,00€.Current price is: 429,00€.

In Stock

Add to cart
Art. 0176 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)
Art. 0176

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm.

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0136 - Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. - Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).
Art. 0136

Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.

Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).

Original price was: 250,00€.Current price is: 144,00€.

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0800 - Oil temperature transmitter. - Oil temperature transmitter 16×1,5 mm.
Art. 0800

Oil temperature transmitter.

Oil temperature transmitter 16×1,5 mm.

13,70€

In Stock

Add to cart

Cart totals

Subtotal 1.006,75€
Shipping
Calculate shipping
Total 1.006,75€
Proceed to checkout