Product Price Quantity Total
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. Art. 0420R Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 17,50€
17,50€
× Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. Art. 0310 Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. 248,00€
248,00€
× Pistons cast alloy Fiat 500 R Fiat 126 595 cc, Ø 73,5 mm. std. Complete set. Art. 0304 Pistons cast alloy Fiat 500 R Fiat 126 595 cc, Ø 73,5 mm. std. Complete set. 169,00€
169,00€
× Fiat 500 D F L R Francis Lombardi dashboard with white instruments. Art. 0730bia Fiat 500 D F L R Francis Lombardi dashboard with white instruments. 550,00€
550,00€
× Fiat 500 F L R Abarth new fuel tank. Art. 0141a Fiat 500 F L R Abarth new fuel tank. 159,00€
159,00€
× Fiat 500 NANNI kit 5 speed with 3, 4 short speedand overdrive gearbox with gaskets. Art. 0110 Fiat 500 NANNI kit 5 speed with 3, 4 short speedand overdrive gearbox with gaskets. 697,00€
697,00€
× Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. Art. 0465 Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. 45,00€
90,00€
× Dashboard red light Art. 0809 Dashboard red light 7,00€
7,00€
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. Art. 0286 Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. 32,00€
32,00€
× Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. Art. 0159 Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. 279,00€
279,00€
× Fiat 500 Fiat 126 Abarth speed change lever with mahogany ballgrip. Art. 0039 Fiat 500 Fiat 126 Abarth speed change lever with mahogany ballgrip. 59,50€
59,50€
× Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. Art. 0421 Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. 17,50€
17,50€
× Abarth oil temperature gauge, black. Art. 0772 Abarth oil temperature gauge, black. 49,50€
49,50€
× Rubber ring Viton for inlet manifold alloy spacer. Art. 0176V Rubber ring Viton for inlet manifold alloy spacer. 6,80€
6,80€
× Giannini diameter 52 mm. new oil pressure black gauge. Art. 0771G Giannini diameter 52 mm. new oil pressure black gauge. 49,50€
49,50€
× Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke Art. 0292 Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke 298,00€
298,00€
× Timing chain set Fiat 500 Fiat 126 Fiat Giardiniera high quality. Art. 0255 Timing chain set Fiat 500 Fiat 126 Fiat Giardiniera high quality. 29,80€
29,80€
× Steel brackets kit for mounting the steering Fiat 126. Art. 0497 Steel brackets kit for mounting the steering Fiat 126. 19,80€
19,80€
× Wheel arches Fiat 500 NANNI fiberglass set for stradal use. Art. 0840 Wheel arches Fiat 500 NANNI fiberglass set for stradal use. 178,00€
178,00€
× Muffler Fiat 500 R Fiat 126 high efficiency stainless steel with head direct connection. Art. 0238 Muffler Fiat 500 R Fiat 126 high efficiency stainless steel with head direct connection. 199,70€
199,70€

You may be interested in…

Art. 0141h - Cap fuel tank Fiat 500 Abarth. - Cap fuel tank Fiat 500 Abarth. Made in red satined aluminium. Engraved coat of arms Abarth.
Art. 0141h

Cap fuel tank Fiat 500 Abarth.

Cap fuel tank Fiat 500 Abarth. Made in red satined aluminium. Engraved coat of arms Abarth.

49,00€

In Stock

Add to cart
Art. 0141R - Fiat 500 L fuel tank gauge - Fiat 500 L fuel tank gauge (level indicator)
Art. 0141R

Fiat 500 L fuel tank gauge

Fiat 500 L fuel tank gauge (level indicator)

49,80€

In Stock

Add to cart
Art. 0293B - Conrods H beam Fiat 500 Fiat 126 steel lenght 118 mm. - Fiat 500 Fiat 126 pair steel H-beam conrods original length 118 mm. with ARP bolts.(complete set).
Art. 0293B

Conrods H beam Fiat 500 Fiat 126 steel lenght 118 mm.

Fiat 500 Fiat 126 pair steel H-beam conrods original length 118 mm. with ARP bolts.(complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0438 - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.
Art. 0438

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

39,80€

In Stock

Add to cart
Art. 0384 - Mount engine Fiat 500 Fiat 126 std. side flywheel. - Mount engine Fiat 500 Fiat 126 std. side flywheel.
Art. 0384

Mount engine Fiat 500 Fiat 126 std. side flywheel.

Mount engine Fiat 500 Fiat 126 std. side flywheel.

69,50€

In Stock

Add to cart
Art. 0706 - Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm) - Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm). Our product.
Art. 0706

Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm)

Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm). Our product.

129,00€

In Stock

Add to cart
Art. 0388 - Bearings conrods Fiat 500 Fiat 126 STD. - Bearings conrods Fiat 500 Fiat 126 STD.
Art. 0388

Bearings conrods Fiat 500 Fiat 126 STD.

Bearings conrods Fiat 500 Fiat 126 STD.

24,00€

In Stock

Add to cart
Art. 0423 - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm. - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.
Art. 0423

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0800 - Oil temperature transmitter. - Oil temperature transmitter 16×1,5 mm.
Art. 0800

Oil temperature transmitter.

Oil temperature transmitter 16×1,5 mm.

13,70€

In Stock

Add to cart
Art. 0489Z - Fiat 126 Bis steering head - Fiat 126 Bis steering head, thread diam. 12 mm.
Art. 0489Z

Fiat 126 Bis steering head

Fiat 126 Bis steering head, thread diam. 12 mm.

Original price was: 22,00€.Current price is: 14,00€.

In Stock

Add to cart
Art. 0159A - Fiat 126 Original pipe over the carburettor Weber 28 IMB. - Fiat 126 Original pipe over the carburettor Weber 28 IMB.
Art. 0159A

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

29,50€

In Stock

Add to cart
Art. 0331 - Piston-liner kit forged Fiat 126 800 cc. Ø 85 mm. for up-grading the engine. (NANNI cylinders height 80 mm.) - Forged piston-liner kit 800 cc, Ø 85 mm.for up-grading Fiat 126 engine. (NANNI cylinders don’t require the head gasket, but need 2 art. 0429A ( copper rings ). The pistons are with the compression height 28 mm. and 35 mm. Please write, in the notes, the compression height of the pistons you require.
Art. 0331

Piston-liner kit forged Fiat 126 800 cc. Ø 85 mm. for up-grading the engine. (NANNI cylinders height 80 mm.)

Forged piston-liner kit 800 cc, Ø 85 mm.for up-grading Fiat 126 engine. (NANNI cylinders don’t require the head gasket, but need 2 art. 0429A ( copper rings ). The pistons are with the compression height 28 mm. and 35 mm. Please write, in the notes, the compression height of the pistons you require.

Original price was: 900,00€.Current price is: 499,00€.

In Stock

Add to cart
Art. 0841 - Wheel arches Fiat 500 NANNI fiberglass set “ex-group n. 2”, extending car 6,5 cm for each side . - Wheel arches Fiat 500 NANNI fiberglass set ex-group n. 2”, extending car 6,5 cm for each side.
Art. 0841

Wheel arches Fiat 500 NANNI fiberglass set “ex-group n. 2”, extending car 6,5 cm for each side .

Wheel arches Fiat 500 NANNI fiberglass set ex-group n. 2”, extending car 6,5 cm for each side.

198,00€

In Stock

Add to cart
Art. 0705 - Fiat 500 D F R Abarth fiberglass instrument binnacle (hole Ø 100 mm) - Fiat 500 D F R Abarth fiberglass instrument binnacle (hole Ø 100 mm) Our product.
Art. 0705

Fiat 500 D F R Abarth fiberglass instrument binnacle (hole Ø 100 mm)

Fiat 500 D F R Abarth fiberglass instrument binnacle (hole Ø 100 mm) Our product.

129,00€

In Stock

Add to cart
Art. 0438S - Gaskets Fiat 500 Fiat 126 upper engine set . - Gaskets Fiat 500 Fiat 126 upper engine set.
Art. 0438S

Gaskets Fiat 500 Fiat 126 upper engine set .

Gaskets Fiat 500 Fiat 126 upper engine set.

19,50€

In Stock

Add to cart
Art. 0293A - Conrods H beam Fiat 500 Fiat 126 length 130 mm. - Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).
Art. 0293A

Conrods H beam Fiat 500 Fiat 126 length 130 mm.

Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0142 - Admission pipe light alloy NANNI with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100 R and Fiat 126. - NANNI light alloy admission pipe with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100R and Fiat 126.
Art. 0142

Admission pipe light alloy NANNI with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100 R and Fiat 126.

NANNI light alloy admission pipe with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100R and Fiat 126.

Original price was: 58,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0429 - Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm. - Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).
Art. 0429

Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.

Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).

15,80€

In Stock

Add to cart
Art. 0843 - Wheel arches Abarth 695 fiberglass set competition style, extending car 7,5 cm. for each side. - Wheel arches Abarth 695 fiberglass set competition style, extending car 7,5 cm for each side.
Art. 0843

Wheel arches Abarth 695 fiberglass set competition style, extending car 7,5 cm. for each side.

Wheel arches Abarth 695 fiberglass set competition style, extending car 7,5 cm for each side.

198,00€

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0256 - Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat - Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.
Art. 0256

Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat

Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.

Original price was: 500,00€.Current price is: 249,00€.

In Stock

Add to cart
Art. 0387K - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.
Art. 0387K

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

19,00€

In Stock

Add to cart
Art. 0489 - Fiat 126 new steering. - Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.
Art. 0489

Fiat 126 new steering.

Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.

Original price was: 300,00€.Current price is: 168,00€.

In Stock

Add to cart
Art. 0471 - Shock absorber Fiat 500 Fiat 126 rear reinforced new. - Shock absorber Fiat 500 Fiat 126 rear reinforced new.
Art. 0471

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

65,00€

In Stock

Add to cart
Art. 0387S - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.
Art. 0387S

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.

Original price was: 200,00€.Current price is: 99,80€.

In Stock

Add to cart
Art. 0492 - Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces). - Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. ( 2 pieces ).
Art. 0492

Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces).

Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. ( 2 pieces ).

78,00€

In Stock

Add to cart
Art. 0494 - Rubber items set for art.0492 - Rubber items set for art.0492
Art. 0494

Rubber items set for art.0492

Rubber items set for art.0492

8,80€

In Stock

Add to cart
Art. 0808 - Dashboard green light - Dashboard green light
Art. 0808

Dashboard green light

Dashboard green light

7,00€

In Stock

Add to cart
Art. 0178 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)
Art. 0178

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0420R - Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. - Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.
Art. 0420R

Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.

Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0220C - Fiat 500 Fiat 126 exaust manifold gasket. - Fiat 500 Fiat 126 exaust manifold gasket.
Art. 0220C

Fiat 500 Fiat 126 exaust manifold gasket.

Fiat 500 Fiat 126 exaust manifold gasket.

6,80€

In Stock

Add to cart
Art. 0711 - Fiat 500 D F R Giannini oval fiberglass instrument binnacle (instrumentsØ 80 mm). - Fiat 500 D F R Giannini fiberglass instrument binnacle (instruments Ø 80 mm). Our product.
Art. 0711

Fiat 500 D F R Giannini oval fiberglass instrument binnacle (instrumentsØ 80 mm).

Fiat 500 D F R Giannini fiberglass instrument binnacle (instruments Ø 80 mm). Our product.

129,00€

In Stock

Add to cart
Art. 0380 - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.
Art. 0380

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0176 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)
Art. 0176

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm.

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0427 - Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. - Copper rings set Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. (2 pieces).
Art. 0427

Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm.

Copper rings set Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. (2 pieces).

15,80€

In Stock

Add to cart
Art. 0221S - Fiat 500 R Fiat 126 muffler original mounting steel brackets - Fiat 500 R Fiat 126 muffler original mounting steel brackets.
Art. 0221S

Fiat 500 R Fiat 126 muffler original mounting steel brackets

Fiat 500 R Fiat 126 muffler original mounting steel brackets.

39,50€

In Stock

Add to cart
Art. 0801 - Original Veglia Jaeger oil pressure transmitter (2 pieces) - Original Veglia Jaeger oil pressure transmitter (2 pieces)
Art. 0801

Original Veglia Jaeger oil pressure transmitter (2 pieces)

Original Veglia Jaeger oil pressure transmitter (2 pieces)

138,70€

In Stock

Add to cart
Art. 0177 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)
Art. 0177

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0468 - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.
Art. 0468

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring.

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.

16,00€

In Stock

Add to cart
Art. 0178A - Fiat 126 carburettor original thermic spacer. - Fiat 126 carburettor original thermic spacer.
Art. 0178A

Fiat 126 carburettor original thermic spacer.

Fiat 126 carburettor original thermic spacer.

25,00€

In Stock

Add to cart
Art. 0337 - Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI. - Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI (Does not require the head gasket but need the our copper cylinder rings art. 0427).
Art. 0337

Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI.

Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI (Does not require the head gasket but need the our copper cylinder rings art. 0427).

89,50€

In Stock

Add to cart
Art. 0146 - Fiat 500 Fiat 126 steel admission pipe with net for original carburettor. - Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.
Art. 0146

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

59,50€

In Stock

Add to cart
Art. 0472 - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.
Art. 0472

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers.

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.

Original price was: 150,00€.Current price is: 98,00€.

In Stock

Add to cart
Art. 0860L - Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches. - Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches.
Art. 0860L

Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches.

Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches.

190,00€

In Stock

Add to cart

Cart totals

Subtotal 3.156,60€
Shipping
Calculate shipping
Total 3.156,60€
Proceed to checkout