×Brake pad set Fiat 500 Fiat 126 for front brake rotorconversion kit 12-13”. 2 × 39,50€
×Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. 3 × 339,00€
×Valve cover cap Fiat 500 D with Giannini plate for our art. 0263. 3 × 29,50€
×Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. 3 × 279,00€
×Fiat 500 cog belt drive pulley set NANNI for dynamo and oil centrifuge (includes cog belt). 1 × 198,50€
×Fiat 126 Original pipe over the carburettor Weber 28 IMB. 2 × 29,50€
×Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB) 2 × 79,00€
×Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. 1 × 19,00€
×Gasket head copper Fiat 695/704 cc. engines 79,5/80 mm. bore, h. 15/10 mm. (2 pieces). 1 × 28,00€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. 1 × 17,50€
×Muffler Fiat 500 R Fiat 126 Abarth style stainless steel with two chromed tail pipes Ø 60 mm. 1 × 225,00€
×Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. 1 × 89,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Muffler Fiat 500 R Fiat 126 Giannini style, stainless steel, with single chromed tail pipe Ø 50 mm. 1 × 179,70€
×Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. 1 × 32,00€
×Fiat 500 Fiat 126 Fiat Giardiniera front brake rotors for conversion kit 10” 1 × 140,00€
×Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 1 × 11,00€
×Carburettor twin-choke diam. 32 mm horizontal Weber over Panda 30 head. 1 × 830,00€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 1 × 17,50€
×Shock absorber Fiat 500 Fiat 126 rear reinforced new. 1 × 65,00€
×Fiat 500 F L R Fiat 126 elastic joint. 1 × 25,00€
×Muffler Fiat 500 Fiat 126 racing silenced stainless steel exhaust. 1 × 269,00€
×Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P. 1 × 397,00€
×Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm 2 × 29,75€
×Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes. 1 × 79,00€
×Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). 1 × 429,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. 1 × 1.095,00€
×Cylinders Abarth 695 cc original joints Ø 76 mm. 1 × 499,70€
×Fiat 500 Fiat 126 exaust manifold gasket. 2 × 6,80€
“Valve cover cap Fiat 500 D with Giannini plate for our art. 0263.” has been added to your cart. View cart
You may be interested in…
Art. 0189
Fiat 500 F L R Little brake booster. It’s indispensable for brake rotor conversion.
Fiat 500 F L R little brake booster. It’s indispensable for brake rotor conversion. Braking power is greater than 30%. Our brake booster is different into the interior, but is the same into the exterior.
200,00€Original price was: 200,00€.119,00€Current price is: 119,00€.
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.
× Fiat 500 cog belt drive pulley set NANNI for dynamo and oil centrifuge (includes cog belt).
× Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB)
× Muffler Fiat 500 R Fiat 126 Abarth style stainless steel with two chromed tail pipes Ø 60 mm.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
× Muffler Fiat 500 R Fiat 126 Giannini style, stainless steel, with single chromed tail pipe Ø 50 mm.
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.
× Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.
× Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P.
× Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).
× Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.
