Product Price Quantity Total
× Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. Art. 0427 Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. 15,80€
31,60€
× Fiat 500 Fiat 126 complete aluminium oil cooler with fittings. Art. 0217 Fiat 500 Fiat 126 complete aluminium oil cooler with fittings. 139,00€
139,00€
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high. Art. 0288 Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high. 32,00€
32,00€
× Cap fuel tank Fiat 500 Giannini. Art. 0141i Cap fuel tank Fiat 500 Giannini. 49,00€
49,00€
× Bearings conrods Fiat 500 Fiat 126 STD. Art. 0388 Bearings conrods Fiat 500 Fiat 126 STD. 24,00€
24,00€
× NANNI alternator pulley. Art. 0205 NANNI alternator pulley. 98,75€
98,75€
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm Art. 0178 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm 39,00€
78,00€
× Fiat 500 F L R Giannini new fuel tank. Art. 0141g Fiat 500 F L R Giannini new fuel tank. 169,00€
169,00€
× Cover oil filter centrifugal Fiat 500 Fiat 126 Giannini. Art. 0454 Cover oil filter centrifugal Fiat 500 Fiat 126 Giannini. 59,00€
59,00€
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. Art. 0420R Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 17,50€
17,50€
× Cover oil filter centrifugal Fiat 500 Fiat 126 Abarth. Art. 0453 Cover oil filter centrifugal Fiat 500 Fiat 126 Abarth. 59,00€
59,00€
× Cylinders Abarth 695 cc original joints Ø 76 mm. Art. 0341 Cylinders Abarth 695 cc original joints Ø 76 mm. 499,70€
499,70€
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. Art. 0176 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. 35,00€
70,00€
× Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. Art. 0421 Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. 17,50€
17,50€
× Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. Art. 0289 Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. 1.095,00€
1.095,00€
× Rubber ring Viton for inlet manifold alloy spacer. Art. 0176V Rubber ring Viton for inlet manifold alloy spacer. 6,80€
6,80€
× Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. Art. 0387K Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. 19,00€
19,00€
× Admission pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000. Art. 0144 Admission pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000. 35,00€
35,00€
× Rings copper Fiat engine 800 cc. under cylinders with pistons Ø 85 mm. H.0,6 mm. Art. 0429A Rings copper Fiat engine 800 cc. under cylinders with pistons Ø 85 mm. H.0,6 mm. 15,80€
15,80€

You may be interested in…

Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0438 - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.
Art. 0438

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

39,80€

In Stock

Add to cart
Art. 0292B - Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). - Fiat 500-126 bushing crankshaft (side flywheel).
Art. 0292B

Bushing crankshaft Fiat 500 Fiat 126 (side flywheel).

Fiat 500-126 bushing crankshaft (side flywheel).

19,00€

In Stock

Add to cart
Art. 0286 - Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. - Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.
Art. 0286

Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.

Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.

Original price was: 50,00€.Current price is: 32,00€.

In Stock

Add to cart
Art. 0293B - Conrods H beam Fiat 500 Fiat 126 steel lenght 118 mm. - Fiat 500 Fiat 126 pair steel H-beam conrods original length 118 mm. with ARP bolts.(complete set).
Art. 0293B

Conrods H beam Fiat 500 Fiat 126 steel lenght 118 mm.

Fiat 500 Fiat 126 pair steel H-beam conrods original length 118 mm. with ARP bolts.(complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0213 - Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
Art. 0213

Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0290 - Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. - Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced and coppery same the original Abarth, made of steel, with 76 mm stroke.
Art. 0290

Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.

Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced and coppery same the original Abarth, made of steel, with 76 mm stroke.

1.150,00€

In Stock

Add to cart
Art. 0336 - Cylinder Fiat 500 R Fiat 126 Ø 73,5 mm, h. 80 mm. 595 cc. - Cylinder Fiat 500 R Fiat 126 Ø 73,5 mm, h. 80 mm, 595 cc. (Does not require the head gasket but need our copper rings art. 0427).
Art. 0336

Cylinder Fiat 500 R Fiat 126 Ø 73,5 mm, h. 80 mm. 595 cc.

Cylinder Fiat 500 R Fiat 126 Ø 73,5 mm, h. 80 mm, 595 cc. (Does not require the head gasket but need our copper rings art. 0427).

89,50€

In Stock

Add to cart
Art. 0212 - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
Art. 0212

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0438S - Gaskets Fiat 500 Fiat 126 upper engine set . - Gaskets Fiat 500 Fiat 126 upper engine set.
Art. 0438S

Gaskets Fiat 500 Fiat 126 upper engine set .

Gaskets Fiat 500 Fiat 126 upper engine set.

19,50€

In Stock

Add to cart
Art. 0292 - Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke - Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke.
Art. 0292

Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke

Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke.

Original price was: 500,00€.Current price is: 298,00€.

In Stock

Add to cart
Art. 0143 - Admission pipe light alloy NANNI with net (40 mm. Ø) for carburettor Alfa Romeo Giulia. - NANNI light alloy admission pipe with net (40 mm. Ø) for corburettor Weber DCOE, Dell’Orto DHLA.
Art. 0143

Admission pipe light alloy NANNI with net (40 mm. Ø) for carburettor Alfa Romeo Giulia.

NANNI light alloy admission pipe with net (40 mm. Ø) for corburettor Weber DCOE, Dell’Orto DHLA.

Original price was: 58,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0424 - Head gasket Fiat 126 NANNI copper for 800 cc. engine 85 mm. bore, h. 6/10 mm. - Head gasket Fiat 126 NANNI copper head gasket for 800 cc. engine 85 mm. bore, h. 6/10 mm.
Art. 0424

Head gasket Fiat 126 NANNI copper for 800 cc. engine 85 mm. bore, h. 6/10 mm.

Head gasket Fiat 126 NANNI copper head gasket for 800 cc. engine 85 mm. bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0384 - Mount engine Fiat 500 Fiat 126 std. side flywheel. - Mount engine Fiat 500 Fiat 126 std. side flywheel.
Art. 0384

Mount engine Fiat 500 Fiat 126 std. side flywheel.

Mount engine Fiat 500 Fiat 126 std. side flywheel.

69,50€

In Stock

Add to cart
Art. 0141R - Fiat 500 L fuel tank gauge - Fiat 500 L fuel tank gauge (level indicator)
Art. 0141R

Fiat 500 L fuel tank gauge

Fiat 500 L fuel tank gauge (level indicator)

49,80€

In Stock

Add to cart
Art. 0136 - Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. - Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).
Art. 0136

Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.

Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).

Original price was: 250,00€.Current price is: 144,00€.

In Stock

Add to cart
Art. 0296 - Forged pistons Abarth 695 Ø 76 mm std. - Forged pistons Abarth 695 diam. 76 mm. std.(complete set).
Art. 0296

Forged pistons Abarth 695 Ø 76 mm std.

Forged pistons Abarth 695 diam. 76 mm. std.(complete set).

388,00€

In Stock

Add to cart
Art. 0387 - Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI. - Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI.
Art. 0387

Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI.

Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI.

Original price was: 180,00€.Current price is: 89,80€.

In Stock

Add to cart
Art. 0380 - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.
Art. 0380

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0387S - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.
Art. 0387S

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.

Original price was: 200,00€.Current price is: 99,80€.

In Stock

Add to cart
Art. 0433 - Gasket head copper Fiat 800 cc. engine 85 mm. bore, h. 15/10 mm. (2 pieces). - Head copper gasket Fiat 800 cc.engine 85 mm. bore, h. 15/10 mm. (2 pieces).
Art. 0433

Gasket head copper Fiat 800 cc. engine 85 mm. bore, h. 15/10 mm. (2 pieces).

Head copper gasket Fiat 800 cc.engine 85 mm. bore, h. 15/10 mm. (2 pieces).

28,00€

In Stock

Add to cart
Art. 0218 - Steel and rubber oil pipe (2 m.) - Steel and rubber oil pipe (2 m.)
Art. 0218

Steel and rubber oil pipe (2 m.)

Steel and rubber oil pipe (2 m.)

28,00€

In Stock

Add to cart
Art. 0177 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)
Art. 0177

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart

Cart totals

Subtotal 2.515,65€
Shipping
Calculate shipping
Total 2.515,65€
Proceed to checkout