×Brake pad set Fiat 500 Fiat 126 for front brake rotorconversion kit 12-13”. 2 × 39,50€
×Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. 3 × 339,00€
×Valve cover cap Fiat 500 D with Giannini plate for our art. 0263. 2 × 29,50€
×Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. 3 × 279,00€
×Fiat 500 cog belt drive pulley set NANNI for dynamo and oil centrifuge (includes cog belt). 1 × 198,50€
×Fiat 126 Original pipe over the carburettor Weber 28 IMB. 2 × 29,50€
×Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB) 2 × 79,00€
×Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. 1 × 19,00€
×Gasket head copper Fiat 695/704 cc. engines 79,5/80 mm. bore, h. 15/10 mm. (2 pieces). 1 × 28,00€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. 1 × 17,50€
×Muffler Fiat 500 R Fiat 126 Abarth style stainless steel with two chromed tail pipes Ø 60 mm. 1 × 225,00€
×Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. 1 × 89,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Muffler Fiat 500 R Fiat 126 Giannini style, stainless steel, with single chromed tail pipe Ø 50 mm. 1 × 179,70€
×Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. 1 × 32,00€
×Fiat 500 Fiat 126 Fiat Giardiniera front brake rotors for conversion kit 10” 1 × 140,00€
×Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 1 × 11,00€
×Carburettor twin-choke diam. 32 mm horizontal Weber over Panda 30 head. 1 × 830,00€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 1 × 17,50€
×Shock absorber Fiat 500 Fiat 126 rear reinforced new. 1 × 65,00€
×Fiat 500 F L R Fiat 126 elastic joint. 1 × 25,00€
×Muffler Fiat 500 Fiat 126 racing silenced stainless steel exhaust. 1 × 269,00€
×Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P. 1 × 397,00€
×Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm 2 × 29,75€
×Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes. 1 × 79,00€
×Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). 2 × 429,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. 1 × 1.095,00€
×Cylinders Abarth 695 cc original joints Ø 76 mm. 1 × 499,70€
×Fiat 500 Fiat 126 exaust manifold gasket. 2 × 6,80€
×Fiat 500 D F L R original new stub axle assembly complete (left and right, black color). 1 × 270,00€
Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.
Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).
690,00€Original price was: 690,00€.339,00€Current price is: 339,00€.
Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).
Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.
800,00€Original price was: 800,00€.429,00€Current price is: 429,00€.
Fiat 500 F L R Little brake booster. It’s indispensable for brake rotor conversion.
Fiat 500 F L R little brake booster. It’s indispensable for brake rotor conversion. Braking power is greater than 30%. Our brake booster is different into the interior, but is the same into the exterior.
200,00€Original price was: 200,00€.119,00€Current price is: 119,00€.
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.
× Fiat 500 cog belt drive pulley set NANNI for dynamo and oil centrifuge (includes cog belt).
× Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB)
× Muffler Fiat 500 R Fiat 126 Abarth style stainless steel with two chromed tail pipes Ø 60 mm.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
× Muffler Fiat 500 R Fiat 126 Giannini style, stainless steel, with single chromed tail pipe Ø 50 mm.
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.
× Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.
× Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P.
× Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).
× Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.
× Fiat 500 D F L R original new stub axle assembly complete (left and right, black color).
