Product Price Quantity Total
× Fiat 500 F/L/R original Fiat complete driveshaft set. (Very high quality). Art. 0121 Fiat 500 F/L/R original Fiat complete driveshaft set. (Very high quality). 185,00€
185,00€
× Rev. counter drive unit for distributor Art. 0805 Rev. counter drive unit for distributor 399,00€
1.197,00€
× Timing chain set Fiat 500 Fiat 126 Fiat Giardiniera high quality. Art. 0255 Timing chain set Fiat 500 Fiat 126 Fiat Giardiniera high quality. 29,80€
29,80€
× Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm. Art. 0466 Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm. 45,00€
45,00€
× Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. Art. 0465 Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. 45,00€
45,00€
× Abarth fuel level gauge, black Art. 0770 Abarth fuel level gauge, black 49,50€
49,50€
× Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. Art. 0288A Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 11,00€
11,00€
× Fiat 126 belt drive pulleys set NANNI for alternator (kit includes belt). Art. 0207 Fiat 126 belt drive pulleys set NANNI for alternator (kit includes belt). 169,00€
169,00€
× Fiat 500 Fiat 126 Giannini chromed aluminium gear knob with black leather. Art. 0032 Fiat 500 Fiat 126 Giannini chromed aluminium gear knob with black leather. 69,00€
69,00€
× Abarth oil pressure gauge, black. Art. 0771 Abarth oil pressure gauge, black. 49,50€
49,50€
× Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. Art. 0290 Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. 1.095,00€
2.190,00€
× Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. Art. 0310 Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. 248,00€
248,00€
× Rubber ring Viton for inlet manifold alloy spacer. Art. 0176V Rubber ring Viton for inlet manifold alloy spacer. 6,80€
6,80€

You may be interested in…

Art. 0341 - Cylinders Abarth 695 cc original joints Ø 76 mm. - Abarth 695 cc. original joints cylinders Ø 76 mm. ATTENTION PLEASE!! We  sell this cylinders only with the pistons article 0296.
Art. 0341

Cylinders Abarth 695 cc original joints Ø 76 mm.

Abarth 695 cc. original joints cylinders Ø 76 mm. ATTENTION PLEASE!! We  sell this cylinders only with the pistons article 0296.

499,70€

In Stock

Add to cart
Art. 0296 - Forged pistons Abarth 695 Ø 76 mm std. - Forged pistons Abarth 695 diam. 76 mm. std.(complete set).
Art. 0296

Forged pistons Abarth 695 Ø 76 mm std.

Forged pistons Abarth 695 diam. 76 mm. std.(complete set).

388,00€

In Stock

Add to cart
Art. 0472 - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.
Art. 0472

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers.

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.

Original price was: 150,00€.Current price is: 98,00€.

In Stock

Add to cart
Art. 0199 - Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207. - Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.
Art. 0199

Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.

Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.

19,50€

In Stock

Add to cart
Art. 0423 - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm. - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.
Art. 0423

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0429 - Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm. - Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).
Art. 0429

Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.

Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).

15,80€

In Stock

Add to cart
Art. 0438 - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.
Art. 0438

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

39,80€

In Stock

Add to cart
Art. 0141R - Fiat 500 L fuel tank gauge - Fiat 500 L fuel tank gauge (level indicator)
Art. 0141R

Fiat 500 L fuel tank gauge

Fiat 500 L fuel tank gauge (level indicator)

49,80€

In Stock

Add to cart
Art. 0801 - Original Veglia Jaeger oil pressure transmitter (2 pieces) - Original Veglia Jaeger oil pressure transmitter (2 pieces)
Art. 0801

Original Veglia Jaeger oil pressure transmitter (2 pieces)

Original Veglia Jaeger oil pressure transmitter (2 pieces)

138,70€

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0379 - Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain. - Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.
Art. 0379

Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain.

Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.

14,80€

In Stock

Add to cart
Art. 0178 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)
Art. 0178

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0177 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)
Art. 0177

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0256 - Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat - Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.
Art. 0256

Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat

Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.

Original price was: 500,00€.Current price is: 249,00€.

In Stock

Add to cart
Art. 0471 - Shock absorber Fiat 500 Fiat 126 rear reinforced new. - Shock absorber Fiat 500 Fiat 126 rear reinforced new.
Art. 0471

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

65,00€

In Stock

Add to cart
Art. 0329 - Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). - Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.
Art. 0329

Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).

Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.

Original price was: 800,00€.Current price is: 429,00€.

In Stock

Add to cart
Art. 0452C - Fiat 500 Fiat 126 front engine mounting. - Fiat 500 Fiat 126 front engine mounting.
Art. 0452C

Fiat 500 Fiat 126 front engine mounting.

Fiat 500 Fiat 126 front engine mounting.

8,90€

In Stock

Add to cart
Art. 0380 - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.
Art. 0380

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0388 - Bearings conrods Fiat 500 Fiat 126 STD. - Bearings conrods Fiat 500 Fiat 126 STD.
Art. 0388

Bearings conrods Fiat 500 Fiat 126 STD.

Bearings conrods Fiat 500 Fiat 126 STD.

24,00€

In Stock

Add to cart
Art. 0176 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)
Art. 0176

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm.

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0328 - Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. - Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).
Art. 0328

Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.

Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).

Original price was: 690,00€.Current price is: 339,00€.

In Stock

Add to cart
Art. 0121A - Fiat 500 F L R Fiat 126 elastic joint. - Fiat 500 F L R Fiat 126 elastic joint.
Art. 0121A

Fiat 500 F L R Fiat 126 elastic joint.

Fiat 500 F L R Fiat 126 elastic joint.

25,00€

In Stock

Add to cart
Art. 0468 - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.
Art. 0468

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring.

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.

16,00€

In Stock

Add to cart
Art. 0807 - Veglia/Jaeger rev. counter cable complete, connection diam. 17 mm. - Veglia/Jaeger rev. counter cable complete, connection diam. 17 mm. length 320 cm.
Art. 0807

Veglia/Jaeger rev. counter cable complete, connection diam. 17 mm.

Veglia/Jaeger rev. counter cable complete, connection diam. 17 mm. length 320 cm.

169,00€

In Stock

Add to cart
Art. 0384 - Mount engine Fiat 500 Fiat 126 std. side flywheel. - Mount engine Fiat 500 Fiat 126 std. side flywheel.
Art. 0384

Mount engine Fiat 500 Fiat 126 std. side flywheel.

Mount engine Fiat 500 Fiat 126 std. side flywheel.

69,50€

In Stock

Add to cart
Art. 0293A - Conrods H beam Fiat 500 Fiat 126 length 130 mm. - Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).
Art. 0293A

Conrods H beam Fiat 500 Fiat 126 length 130 mm.

Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0806 - Jaeger/Smith rev. counter cable complete, connection diam. 12 mm. - Jaeger/Smith rev. counter cable complete, connection diam. 12 mm. Length 320 cm.
Art. 0806

Jaeger/Smith rev. counter cable complete, connection diam. 12 mm.

Jaeger/Smith rev. counter cable complete, connection diam. 12 mm. Length 320 cm.

169,00€

In Stock

Add to cart

Cart totals

Subtotal 4.294,60€
Shipping
Calculate shipping
Total 4.294,60€
Proceed to checkout