×Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. 1 × 15,80€
×Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high. 1 × 32,00€
×Fiat 500 Fiat 126 complete aluminium oil cooler with fittings. 4 × 139,00€
×Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. 2 × 35,00€
×Piston-liner kit forged Fiat 126 800 cc. Ø 85 mm. for up-grading the engine. (NANNI cylinders height 80 mm.) 1 × 499,00€
×Cylinder Fiat 500 D F L Ø 73,5 mm, h. 90 mm, 595 cc. NANNI. 3 × 89,50€
×Cylinders Abarth 695 cc original joints Ø 76 mm. 1 × 499,70€
×Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. 1 × 1.095,00€
×Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. 1 × 99,80€
×Bearings conrods Fiat 500 Fiat 126 STD. 1 × 24,00€
×Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm 1 × 39,00€
×Mount engine Fiat 500 Fiat 126 steel 0,20 NANNI side chain. 2 × 89,00€
×Mount engine Fiat 500 Fiat 126 0,20 mm. side flywheel. 2 × 69,50€
×Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). 2 × 19,00€
×Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. 2 × 19,00€
×Cog belt reinforced for our drive pulley set 0200 and 0201. 2 × 39,50€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×NANNI motor pulley with oil centrifuge. 1 × 139,50€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 1 × 17,50€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Pistons cast alloy Fiat 126 650 cc. Ø 77 mm. std. Complete set. 1 × 179,00€
×Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm 1 × 39,00€
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high.
× Piston-liner kit forged Fiat 126 800 cc. Ø 85 mm. for up-grading the engine. (NANNI cylinders height 80 mm.)
× Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.
× Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
