×Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P 3 × 397,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. 1 × 1.095,00€
×Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke 1 × 298,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). 1 × 19,00€
×Fiat 500 My car Francis Lombardi fiberglass dashboard for instruments, hole Ø 100 mm. 1 × 169,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. 1 × 1.095,00€
×Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA). 1 × 159,70€
×Valve cover cap Fiat 500 D with Giannini plate for our art. 0263. 1 × 29,50€
Piston-liner kit forged Fiat 126 800 cc. Ø 85 mm. for up-grading the engine. (NANNI cylinders height 80 mm.)
Forged piston-liner kit 800 cc, Ø 85 mm.for up-grading Fiat 126 engine. (NANNI cylinders don’t require the head gasket, but need 2 art. 0429A ( copper rings ). The pistons are with the compression height 28 mm. and 35 mm. Please write, in the notes, the compression height of the pistons you require.
900,00€Original price was: 900,00€.499,00€Current price is: 499,00€.
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P
× Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
× Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.
× Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA).
