Product Price Quantity Total
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm Art. 0177 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm 39,00€
39,00€
× Shock absorber spring for our art. 0473 for stradal use. Art. 0481 Shock absorber spring for our art. 0473 for stradal use. 39,50€
39,50€
× Cylinder Fiat 500 R Fiat 126 Ø 80 mm. high 80 mm. 704 cc. NANNI . Art. 0344 Cylinder Fiat 500 R Fiat 126 Ø 80 mm. high 80 mm. 704 cc. NANNI . 89,50€
89,50€
× Fiat 500 NANNI kit 5 speed with 3, 4, 5 short speed gearbox with gaskets. Art. 0109 Fiat 500 NANNI kit 5 speed with 3, 4, 5 short speed gearbox with gaskets. 697,00€
697,00€
× Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm Art. 0153 Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm 29,75€
29,75€
× Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. Art. 0438 Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. 39,80€
39,80€
× Fiat 500 F L R NANNI original front grille chromed. Art. 0501N Fiat 500 F L R NANNI original front grille chromed. 99,00€
99,00€
× Gaskets Fiat 500 Fiat 126 upper engine set . Art. 0438S Gaskets Fiat 500 Fiat 126 upper engine set . 19,50€
19,50€
× Fiat 500 Fiat 126 Giannini mahogany gear knob. Art. 0030 Fiat 500 Fiat 126 Giannini mahogany gear knob. 39,50€
39,50€
× Fiat 500 F L (R first series ) complete brackets kit to raise the upper trapeze of the front suspension. Art. 0488 Fiat 500 F L (R first series ) complete brackets kit to raise the upper trapeze of the front suspension. 59,50€
59,50€
× Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches. Art. 0860L Fiat 500 NANNI set of fiberglass “miniskirts” for big wheel arches. 190,00€
190,00€
× Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. Art. 0427 Rings copper Fiat engine 650 cc. under cylinders with pistons Ø 77 mm. H.0,8 mm. 15,80€
15,80€
× Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. Art. 0310 Pistons cast alloy Fiat 126 740 cc. diam. 82 mm. STD Complete set. 248,00€
248,00€
× Rubber items set for art.0492 Art. 0494 Rubber items set for art.0492 8,80€
8,80€
× Shock absorber Fiat 500 Fiat 126 NANNI gas front with adjustable spring (for axle 0474). Art. 0473 Shock absorber Fiat 500 Fiat 126 NANNI gas front with adjustable spring (for axle 0474). 250,00€
250,00€
× Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. Art. 0472 Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. 98,00€
98,00€
× Fiat 126 belt drive pulleys set NANNI for alternator (kit includes belt). Art. 0207 Fiat 126 belt drive pulleys set NANNI for alternator (kit includes belt). 169,00€
169,00€
× Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. Art. 0468 Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. 16,00€
16,00€
× Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces). Art. 0492 Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces). 78,00€
78,00€
× Steel brackets kit for mounting the steering Fiat 126. Art. 0497 Steel brackets kit for mounting the steering Fiat 126. 19,80€
19,80€
× Fiat 500 Fiat 126 first model 10” NANNI modular light alloy wheel,4-5-6-7-8 inches. Art. 0076 Fiat 500 Fiat 126 first model 10” NANNI modular light alloy wheel,4-5-6-7-8 inches. 199,50€
199,50€
× Pistons cast alloy Fiat 500 R Fiat 126 595 cc, Ø 73,5 mm. std. Complete set. Art. 0304 Pistons cast alloy Fiat 500 R Fiat 126 595 cc, Ø 73,5 mm. std. Complete set. 169,00€
169,00€
× Racing shock absorber spring for our article 0473. Art. 0482 Racing shock absorber spring for our article 0473. 45,00€
45,00€
× Fiat 500 Fiat 126 Abarth chromed aluminium gear knob with black leather. Art. 0031 Fiat 500 Fiat 126 Abarth chromed aluminium gear knob with black leather. 69,00€
69,00€
× Abarth plate for valve cover cap Fiat 500 D. Art. 0268 Abarth plate for valve cover cap Fiat 500 D. 9,80€
9,80€
× Conrods H beam Fiat 500 Fiat 126 steel lenght 124 mm. with ARP bolts. Art. 0293C Conrods H beam Fiat 500 Fiat 126 steel lenght 124 mm. with ARP bolts. 215,00€
215,00€

You may be interested in…

Art. 0423 - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm. - Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.
Art. 0423

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

Head gasket Fiat 126 NANNI copper for Fiat 740 cc. engine 82 mm. bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0420R - Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. - Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.
Art. 0420R

Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.

Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0199 - Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207. - Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.
Art. 0199

Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.

Belt Fiat 500 Fiat 126 for our drive pulleys set 0206 and 0207.

19,50€

In Stock

Add to cart
Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0387S - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.
Art. 0387S

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.

Original price was: 200,00€.Current price is: 99,80€.

In Stock

Add to cart
Art. 0387K - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.
Art. 0387K

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

19,00€

In Stock

Add to cart
Art. 0428 - Rings copper Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm – Ø 80 mm. H.1 mm. - Copper rings set Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm – Ø 80 mm. H. 1 mm. (2 pieces).
Art. 0428

Rings copper Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm – Ø 80 mm. H.1 mm.

Copper rings set Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm – Ø 80 mm. H. 1 mm. (2 pieces).

15,80€

In Stock

Add to cart
Art. 0547 - Fiat 500 F L R trasparents lights set. - Fiat 500 F L R trasparents lights set.
Art. 0547

Fiat 500 F L R trasparents lights set.

Fiat 500 F L R trasparents lights set.

29,50€

In Stock

Add to cart
Art. 0421 - Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. - Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm.
Art. 0421

Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm.

Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm.

17,50€

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0388 - Bearings conrods Fiat 500 Fiat 126 STD. - Bearings conrods Fiat 500 Fiat 126 STD.
Art. 0388

Bearings conrods Fiat 500 Fiat 126 STD.

Bearings conrods Fiat 500 Fiat 126 STD.

24,00€

In Stock

Add to cart
Art. 0474 - Fiat 500 Fiat 126 light alloy complete axle with oscillating arms . Includes also the silent blocs. - Light alloy complete axle with oscillating arms for Fiat 500 Fiat 126.Includes also the silenblocs and the mounting instructions.
Art. 0474

Fiat 500 Fiat 126 light alloy complete axle with oscillating arms . Includes also the silent blocs.

Light alloy complete axle with oscillating arms for Fiat 500 Fiat 126.Includes also the silenblocs and the mounting instructions.

398,00€

In Stock

Add to cart
Art. 0466 - Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm. - Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.
Art. 0466

Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.

Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.

Original price was: 70,00€.Current price is: 45,00€.

In Stock

Add to cart
Art. 0288 - Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high. - Fiat 500 F L steel plate NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high.
Art. 0288

Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high.

Fiat 500 F L steel plate NANNI to reinforce the cylinder block (for 595 cc). 10 mm. high.

Original price was: 50,00€.Current price is: 32,00€.

In Stock

Add to cart
Art. 0388A - Bearings conrods Fiat 500 Fiat 126 size 0.10”. - Bearings conrods Fiat 500 Fiat 126 size 0.10”.
Art. 0388A

Bearings conrods Fiat 500 Fiat 126 size 0.10”.

Bearings conrods Fiat 500 Fiat 126 size 0.10”.

24,00€

In Stock

Add to cart
Art. 0516 - Abarth with tricolor lightining bolt enamel emblem - Abarth with tricolor lightining bolt enamel emblem.
Art. 0516

Abarth with tricolor lightining bolt enamel emblem

Abarth with tricolor lightining bolt enamel emblem.

19,50€

In Stock

Add to cart
Art. 0092 - Californian rearview mirror right. - Californian rearview mirror right.
Art. 0092

Californian rearview mirror right.

Californian rearview mirror right.

44,00€

In Stock

Add to cart
Art. 0005N - Fiat 500 NANNI rear bonnet support grille chromed. - Fiat 500 NANNI rear bonnet support grille chromed.
Art. 0005N

Fiat 500 NANNI rear bonnet support grille chromed.

Fiat 500 NANNI rear bonnet support grille chromed.

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0483 - Spring shock absorber racing ( very hard) for our art. 0473. - Spring shock absorber for racing (very hard) for our art. 0473 .
Art. 0483

Spring shock absorber racing ( very hard) for our art. 0473.

Spring shock absorber for racing (very hard) for our art. 0473 .

49,50€

In Stock

Add to cart
Art. 0176V - Rubber ring Viton for inlet manifold alloy spacer. - Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.
Art. 0176V

Rubber ring Viton for inlet manifold alloy spacer.

Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.

Original price was: 9,80€.Current price is: 6,80€.

In Stock

Add to cart
Art. 0073 - Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts. - Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts for 500 and 126 first model. ET 25.
Art. 0073

Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts.

Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts for 500 and 126 first model. ET 25.

Original price was: 190,00€.Current price is: 119,50€.

In Stock

Add to cart
Art. 0489 - Fiat 126 new steering. - Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.
Art. 0489

Fiat 126 new steering.

Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.

Original price was: 300,00€.Current price is: 168,00€.

In Stock

Add to cart
Art. 0293A - Conrods H beam Fiat 500 Fiat 126 length 130 mm. - Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).
Art. 0293A

Conrods H beam Fiat 500 Fiat 126 length 130 mm.

Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0136 - Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. - Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).
Art. 0136

Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.

Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).

Original price was: 250,00€.Current price is: 144,00€.

In Stock

Add to cart
Art. 0429 - Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm. - Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).
Art. 0429

Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.

Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).

15,80€

In Stock

Add to cart
Art. 0489Z - Fiat 126 Bis steering head - Fiat 126 Bis steering head, thread diam. 12 mm.
Art. 0489Z

Fiat 126 Bis steering head

Fiat 126 Bis steering head, thread diam. 12 mm.

Original price was: 22,00€.Current price is: 14,00€.

In Stock

Add to cart
Art. 0548 - Fiat 500 F L R black lights set. - Fiat 500 F L R black lights set.
Art. 0548

Fiat 500 F L R black lights set.

Fiat 500 F L R black lights set.

29,50€

In Stock

Add to cart
Art. 0286 - Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. - Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.
Art. 0286

Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.

Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.

Original price was: 50,00€.Current price is: 32,00€.

In Stock

Add to cart
Art. 0488A - Fiat 500 whishbone arms kit. - Fiat 500 whishbone arms kit.
Art. 0488A

Fiat 500 whishbone arms kit.

Fiat 500 whishbone arms kit.

19,70€

In Stock

Add to cart
Art. 0309 - Pistons cast alloy Fiat 500 Fiat 126 704 cc. Ø 80 mm. Complete set. - Cast alloy pistons Fiat 500 Fiat 126 704 cc. Ø 80 mm. Complete set.
Art. 0309

Pistons cast alloy Fiat 500 Fiat 126 704 cc. Ø 80 mm. Complete set.

Cast alloy pistons Fiat 500 Fiat 126 704 cc. Ø 80 mm. Complete set.

198,00€

In Stock

Add to cart
Art. 0488B - Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension. - Fiat 500R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension ( for the articles 0460-0461-0479). Distance between the holes of the trapeze 107 mm.
Art. 0488B

Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension.

Fiat 500R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension ( for the articles 0460-0461-0479). Distance between the holes of the trapeze 107 mm.

Original price was: 90,00€.Current price is: 59,50€.

In Stock

Add to cart
Art. 0379 - Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain. - Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.
Art. 0379

Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain.

Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.

14,80€

In Stock

Add to cart
Art. 0144 - Admission pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000. - NANNI light alloy admission pipe with net (45 mm. Ø) for carburettor Weber DCOE, Dell’Orto DHLA.
Art. 0144

Admission pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000.

NANNI light alloy admission pipe with net (45 mm. Ø) for carburettor Weber DCOE, Dell’Orto DHLA.

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0465 - Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. - Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.
Art. 0465

Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.

Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.

Original price was: 70,00€.Current price is: 45,00€.

In Stock

Add to cart
Art. 0489T - Fiat 126 personal steering head. - Fiat 126 personal steering head, thread diam. 14 mm.
Art. 0489T

Fiat 126 personal steering head.

Fiat 126 personal steering head, thread diam. 14 mm.

14,80€

In Stock

Add to cart
Art. 0840 - Wheel arches Fiat 500 NANNI fiberglass set for stradal use. - Wheel arches Fiat 500 NANNI fiberglass set for stradal use. (Extending car 4 cm. for each side).
Art. 0840

Wheel arches Fiat 500 NANNI fiberglass set for stradal use.

Wheel arches Fiat 500 NANNI fiberglass set for stradal use. (Extending car 4 cm. for each side).

178,00€

In Stock

Add to cart
Art. 0152 - Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) - Fiat 500 air filter cap light alloy Giannini Abarth (Pipe diam. 60 mm.)
Art. 0152

Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.)

Fiat 500 air filter cap light alloy Giannini Abarth (Pipe diam. 60 mm.)

99,00€

In Stock

Add to cart
Art. 0467 - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm. - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.
Art. 0467

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Original price was: 80,00€.Current price is: 49,00€.

In Stock

Add to cart
Art. 0380 - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.
Art. 0380

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0091 - Californian rearview mirror left. - Californian rearview mirror left.
Art. 0091

Californian rearview mirror left.

Californian rearview mirror left.

44,00€

In Stock

Add to cart

Cart totals

Subtotal 2.952,75€
Shipping
Calculate shipping
Total 2.952,75€
Proceed to checkout