Product Price Quantity Total
× Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). Art. 0292B Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). 19,00€
19,00€
× Mount engine Fiat 500 Fiat 126 0,20 mm. side flywheel. Art. 0385 Mount engine Fiat 500 Fiat 126 0,20 mm. side flywheel. 69,50€
69,50€
× Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. Art. 0420R Head gasket Fiat 500 Fiat 126 NANNI copper for 595 cc. engine 73,5 mm bore, h. 6/10 mm. 17,50€
35,00€
× Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces). Art. 0492 Steering supports NANNI to apply art. 0489 Fiat 126 over Fiat 500. (2 pieces). 78,00€
78,00€
× Fiat 500 Fiat 126 NANNI modified Ø 28 mm new Weber carburettor. Art. 0163 Fiat 500 Fiat 126 NANNI modified Ø 28 mm new Weber carburettor. 349,00€
349,00€
× Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. Art. 0465 Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. 45,00€
45,00€
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. Art. 0286 Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. 32,00€
32,00€
× Muffler Fiat 500 R Fiat 126 high efficiency stainless steel with head direct connection. Art. 0238 Muffler Fiat 500 R Fiat 126 high efficiency stainless steel with head direct connection. 199,70€
199,70€
× Fiat 500 F L R Fiat 126 original drive shaft flange. Art. 0121D Fiat 500 F L R Fiat 126 original drive shaft flange. 19,50€
19,50€
× Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. Art. 0328 Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. 339,00€
339,00€
× Conrods H beam Fiat 500 Fiat 126 length 130 mm. Art. 0293A Conrods H beam Fiat 500 Fiat 126 length 130 mm. 215,00€
215,00€
× Fiat 500 F L R Little brake booster. It's indispensable for brake rotor conversion. Art. 0189 Fiat 500 F L R Little brake booster. It's indispensable for brake rotor conversion. 119,00€
119,00€
× Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. Art. 0387S Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. 99,80€
99,80€
× Bumper front Fiat 500 NANNI fiberglass with spoiler and headlights arrangement. Art. 0856 Bumper front Fiat 500 NANNI fiberglass with spoiler and headlights arrangement. 199,00€
199,00€
× Fiat 500 Fiat 126 rear license plate frame made of stainless steel. Art. 0047 Fiat 500 Fiat 126 rear license plate frame made of stainless steel. 17,85€
17,85€
× Oil temperature transmitter. Art. 0800 Oil temperature transmitter. 13,70€
13,70€
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm Art. 0178 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm 39,00€
39,00€
× Fiat 500 D F R Giannini oval fiberglass instrument binnacle (instrumentsØ 80 mm). Art. 0711 Fiat 500 D F R Giannini oval fiberglass instrument binnacle (instrumentsØ 80 mm). 129,00€
129,00€
× Fiat 500 NANNI rear bonnet support grille chromed. Art. 0005N Fiat 500 NANNI rear bonnet support grille chromed. 35,00€
35,00€
× Steel and rubber oil pipe (2 m.) Art. 0218 Steel and rubber oil pipe (2 m.) 28,00€
28,00€
× Fiat 500 NANNI kit 5 speed with 3, 4 short speedand overdrive gearbox with gaskets. Art. 0110 Fiat 500 NANNI kit 5 speed with 3, 4 short speedand overdrive gearbox with gaskets. 697,00€
697,00€
× Abarth oil temperature gauge, white. Art. 0778 Abarth oil temperature gauge, white. 49,50€
49,50€
× Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. Art. 0288A Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 11,00€
11,00€

You may be interested in…

Art. 0293A - Conrods H beam Fiat 500 Fiat 126 length 130 mm. - Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).
Art. 0293A

Conrods H beam Fiat 500 Fiat 126 length 130 mm.

Conrods H beam Fiat 500 Fiat 126 steel length 130 mm. with ARP bolts. (Complete set).

Original price was: 400,00€.Current price is: 215,00€.

In Stock

Add to cart
Art. 0489T - Fiat 126 personal steering head. - Fiat 126 personal steering head, thread diam. 14 mm.
Art. 0489T

Fiat 126 personal steering head.

Fiat 126 personal steering head, thread diam. 14 mm.

14,80€

In Stock

Add to cart
Art. 0337 - Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI. - Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI (Does not require the head gasket but need the our copper cylinder rings art. 0427).
Art. 0337

Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI.

Cylinder Fiat 126 Ø 77 mm, h. 80 mm, 650 cc. NANNI (Does not require the head gasket but need the our copper cylinder rings art. 0427).

89,50€

In Stock

Add to cart
Art. 0213 - Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
Art. 0213

Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0217 - Fiat 500 Fiat 126 complete aluminium oil cooler with fittings. - Fiat 500 Fiat 126 complete with fittings aluminium oil cooler. Sizes 29X8X5 cm. Max. 32,5X11,5X5 cm.
Art. 0217

Fiat 500 Fiat 126 complete aluminium oil cooler with fittings.

Fiat 500 Fiat 126 complete with fittings aluminium oil cooler. Sizes 29X8X5 cm. Max. 32,5X11,5X5 cm.

139,00€

In Stock

Add to cart
Art. 0652red - Sticker original Abarth red scorpion 29 cm. high. - Original Abarth red scorpion sticker 29 cm. high.
Art. 0652red

Sticker original Abarth red scorpion 29 cm. high.

Original Abarth red scorpion sticker 29 cm. high.

14,70€

In Stock

Add to cart
Art. 0468 - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. - Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.
Art. 0468

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring.

Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring our art. 0465-0466-0467.

16,00€

In Stock

Add to cart
Art. 0221S - Fiat 500 R Fiat 126 muffler original mounting steel brackets - Fiat 500 R Fiat 126 muffler original mounting steel brackets.
Art. 0221S

Fiat 500 R Fiat 126 muffler original mounting steel brackets

Fiat 500 R Fiat 126 muffler original mounting steel brackets.

39,50€

In Stock

Add to cart
Art. 0429 - Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm. - Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).
Art. 0429

Rings copper Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.

Copper rings set Fiat engine 740 cc. under cylinders with pistons Ø 82 mm. H. 0,7 mm.(2 pieces).

15,80€

In Stock

Add to cart
Art. 0288A - Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. - Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block for 740 cc. with pistons diam. 82 mm.
Art. 0288A

Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.

Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block for 740 cc. with pistons diam. 82 mm.

11,00€

In Stock

Add to cart
Art. 0180L - Fiat 500 front brake rotor conversion kit for 12” light alloy wheels. - Fiat 500 front brake rotor conversion kit for 12” light alloy wheels. Complete.
Art. 0180L

Fiat 500 front brake rotor conversion kit for 12” light alloy wheels.

Fiat 500 front brake rotor conversion kit for 12” light alloy wheels. Complete.

Original price was: 700,00€.Current price is: 499,00€.

In Stock

Add to cart
Art. 0501N - Fiat 500 F L R NANNI original front grille chromed. - Fiat 500 F L R NANNI original front grille chromed with the rubber gasket.
Art. 0501N

Fiat 500 F L R NANNI original front grille chromed.

Fiat 500 F L R NANNI original front grille chromed with the rubber gasket.

Original price was: 210,00€.Current price is: 99,00€.

In Stock

Add to cart
Art. 0772 - Abarth oil temperature gauge, black. - Abarth diam. 52 mm. oil temperature gauge, black.
Art. 0772

Abarth oil temperature gauge, black.

Abarth diam. 52 mm. oil temperature gauge, black.

49,50€

In Stock

Add to cart
Art. 0121A - Fiat 500 F L R Fiat 126 elastic joint. - Fiat 500 F L R Fiat 126 elastic joint.
Art. 0121A

Fiat 500 F L R Fiat 126 elastic joint.

Fiat 500 F L R Fiat 126 elastic joint.

25,00€

In Stock

Add to cart
Art. 0189B - Fiat 500 brake light switch. - Fiat 500 brake light switch. ( also for our mini servo article 0189 )
Art. 0189B

Fiat 500 brake light switch.

Fiat 500 brake light switch. ( also for our mini servo article 0189 )

13,90€

In Stock

Add to cart
Art. 0164 - NANNI perforated pipe from air filter and Weber Ø 28 mm. carburettor (our art. 0163). - NANNI perforated pipe from air filter and Weber Ø 28 mm. carburettor. (Our art. 0163).
Art. 0164

NANNI perforated pipe from air filter and Weber Ø 28 mm. carburettor (our art. 0163).

NANNI perforated pipe from air filter and Weber Ø 28 mm. carburettor. (Our art. 0163).

19,80€

In Stock

Add to cart
Art. 0388 - Bearings conrods Fiat 500 Fiat 126 STD. - Bearings conrods Fiat 500 Fiat 126 STD.
Art. 0388

Bearings conrods Fiat 500 Fiat 126 STD.

Bearings conrods Fiat 500 Fiat 126 STD.

24,00€

In Stock

Add to cart
Art. 0073 - Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts. - Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts for 500 and 126 first model. ET 25.
Art. 0073

Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts.

Fiat 500 Fiat 126 first model Abarth light alloy wheel 4,5” x 12” with bolts for 500 and 126 first model. ET 25.

Original price was: 190,00€.Current price is: 119,50€.

In Stock

Add to cart
Art. 0092 - Californian rearview mirror right. - Californian rearview mirror right.
Art. 0092

Californian rearview mirror right.

Californian rearview mirror right.

44,00€

In Stock

Add to cart
Art. 0288B - Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. - Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.
Art. 0288B

Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.

Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm.

13,00€

In Stock

Add to cart
Art. 0179 - Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. - Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. Complete.
Art. 0179

Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit.

Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. Complete.

Original price was: 400,00€.Current price is: 298,50€.

In Stock

Add to cart
Art. 0800 - Oil temperature transmitter. - Oil temperature transmitter 16×1,5 mm.
Art. 0800

Oil temperature transmitter.

Oil temperature transmitter 16×1,5 mm.

13,70€

In Stock

Add to cart
Art. 0388A - Bearings conrods Fiat 500 Fiat 126 size 0.10”. - Bearings conrods Fiat 500 Fiat 126 size 0.10”.
Art. 0388A

Bearings conrods Fiat 500 Fiat 126 size 0.10”.

Bearings conrods Fiat 500 Fiat 126 size 0.10”.

24,00€

In Stock

Add to cart
Art. 0212 - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
Art. 0212

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0381 - Mount engine Fiat 500 Fiat 126 steel 0,20 NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 0,20 NANNI side chain.
Art. 0381

Mount engine Fiat 500 Fiat 126 steel 0,20 NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 0,20 NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0008 - Abarth rubber bonnet fastener with mounting hardware. High - Abarth rubber bonnet fastener with mounting hardware. High
Art. 0008

Abarth rubber bonnet fastener with mounting hardware. High

Abarth rubber bonnet fastener with mounting hardware. High

8,90€

In Stock

Add to cart
Art. 0772G - Giannini diameter 52 mm. new oil temperature black gauge. - Giannini diameter 52 mm. new oil temperature black gauge.
Art. 0772G

Giannini diameter 52 mm. new oil temperature black gauge.

Giannini diameter 52 mm. new oil temperature black gauge.

49,50€

In Stock

Add to cart
Art. 0472 - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. - Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.
Art. 0472

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers.

Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced, with special rubbers.

Original price was: 150,00€.Current price is: 98,00€.

In Stock

Add to cart
Art. 0387K - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.
Art. 0387K

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

19,00€

In Stock

Add to cart
Art. 0497 - Steel brackets kit for mounting the steering Fiat 126. - Mounting steering kit steel brackets for Fiat 126.
Art. 0497

Steel brackets kit for mounting the steering Fiat 126.

Mounting steering kit steel brackets for Fiat 126.

19,80€

In Stock

Add to cart
Art. 0182 - Fiat 500 Brembo front brake rotor conversion kit for 10”-12” wheels. - Fiat 500 Brembo front brake rotor conversion kit for 10”-12” wheels. Complete.
Art. 0182

Fiat 500 Brembo front brake rotor conversion kit for 10”-12” wheels.

Fiat 500 Brembo front brake rotor conversion kit for 10”-12” wheels. Complete.

Original price was: 1.200,00€.Current price is: 740,00€.

In Stock

Add to cart
Art. 0471 - Shock absorber Fiat 500 Fiat 126 rear reinforced new. - Shock absorber Fiat 500 Fiat 126 rear reinforced new.
Art. 0471

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

Shock absorber Fiat 500 Fiat 126 rear reinforced new.

65,00€

In Stock

Add to cart
Art. 0136 - Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. - Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).
Art. 0136

Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.

Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).

Original price was: 250,00€.Current price is: 144,00€.

In Stock

Add to cart
Art. 0494 - Rubber items set for art.0492 - Rubber items set for art.0492
Art. 0494

Rubber items set for art.0492

Rubber items set for art.0492

8,80€

In Stock

Add to cart
Art. 0176V - Rubber ring Viton for inlet manifold alloy spacer. - Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.
Art. 0176V

Rubber ring Viton for inlet manifold alloy spacer.

Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.

Original price was: 9,80€.Current price is: 6,80€.

In Stock

Add to cart
Art. 0185 - Fiat 126 Fiat Giardiniera 10”-12”-13” wheels Brembo front brake rotor conversion kit. - Fiar 126 Fiat Giardiniera 10”-12”-13” wheels Brembo front brake rotor conversion kit.
Art. 0185

Fiat 126 Fiat Giardiniera 10”-12”-13” wheels Brembo front brake rotor conversion kit.

Fiar 126 Fiat Giardiniera 10”-12”-13” wheels Brembo front brake rotor conversion kit.

Original price was: 1.000,00€.Current price is: 699,00€.

In Stock

Add to cart
Art. 0778 - Abarth oil temperature gauge, white. - abarth diam. 52 mm. oil temperature gauge, white
Art. 0778

Abarth oil temperature gauge, white.

abarth diam. 52 mm. oil temperature gauge, white

49,50€

In Stock

Add to cart
Art. 0329 - Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). - Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.
Art. 0329

Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).

Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.

Original price was: 800,00€.Current price is: 429,00€.

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0808 - Dashboard green light - Dashboard green light
Art. 0808

Dashboard green light

Dashboard green light

7,00€

In Stock

Add to cart
Art. 0489Z - Fiat 126 Bis steering head - Fiat 126 Bis steering head, thread diam. 12 mm.
Art. 0489Z

Fiat 126 Bis steering head

Fiat 126 Bis steering head, thread diam. 12 mm.

Original price was: 22,00€.Current price is: 14,00€.

In Stock

Add to cart
Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0215 - Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P - Fiat 500 Fiat 126 apply complete kit NANNI for oil cooler. For the oil cooler sizes see our art. 0217. The timing case must to be coupled with the original oil pump Fiat item 0256P
Art. 0215

Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P

Fiat 500 Fiat 126 apply complete kit NANNI for oil cooler. For the oil cooler sizes see our art. 0217. The timing case must to be coupled with the original oil pump Fiat item 0256P

Original price was: 600,00€.Current price is: 397,00€.

In Stock

Add to cart
Art. 0380 - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. - Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.
Art. 0380

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain.

Original price was: 160,00€.Current price is: 89,00€.

In Stock

Add to cart
Art. 0387S - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.
Art. 0387S

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.

Original price was: 200,00€.Current price is: 99,80€.

In Stock

Add to cart
Art. 0159A - Fiat 126 Original pipe over the carburettor Weber 28 IMB. - Fiat 126 Original pipe over the carburettor Weber 28 IMB.
Art. 0159A

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

29,50€

In Stock

Add to cart
Art. 0220C - Fiat 500 Fiat 126 exaust manifold gasket. - Fiat 500 Fiat 126 exaust manifold gasket.
Art. 0220C

Fiat 500 Fiat 126 exaust manifold gasket.

Fiat 500 Fiat 126 exaust manifold gasket.

6,80€

In Stock

Add to cart
Art. 0438S - Gaskets Fiat 500 Fiat 126 upper engine set . - Gaskets Fiat 500 Fiat 126 upper engine set.
Art. 0438S

Gaskets Fiat 500 Fiat 126 upper engine set .

Gaskets Fiat 500 Fiat 126 upper engine set.

19,50€

In Stock

Add to cart
Art. 0091 - Californian rearview mirror left. - Californian rearview mirror left.
Art. 0091

Californian rearview mirror left.

Californian rearview mirror left.

44,00€

In Stock

Add to cart
Art. 0809 - Dashboard red light - Dashboard red light
Art. 0809

Dashboard red light

Dashboard red light

7,00€

In Stock

Add to cart
Art. 0178A - Fiat 126 carburettor original thermic spacer. - Fiat 126 carburettor original thermic spacer.
Art. 0178A

Fiat 126 carburettor original thermic spacer.

Fiat 126 carburettor original thermic spacer.

25,00€

In Stock

Add to cart
Art. 0180 - Fiat 500 front brake rotor conversion kit for 12” steel wheels. - Fiat 500 front brake rotor conversion kit for 12” steel wheels. Complete.
Art. 0180

Fiat 500 front brake rotor conversion kit for 12” steel wheels.

Fiat 500 front brake rotor conversion kit for 12” steel wheels. Complete.

Original price was: 700,00€.Current price is: 499,00€.

In Stock

Add to cart
Art. 0193 - Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes. - Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.
Art. 0193

Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.

Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.

Original price was: 140,00€.Current price is: 79,00€.

In Stock

Add to cart
Art. 0438 - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.
Art. 0438

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

39,80€

In Stock

Add to cart
Art. 0489 - Fiat 126 new steering. - Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.
Art. 0489

Fiat 126 new steering.

Fiat 126 new steering. Can be applied to Fiat 500 with 2 our art. 0492.

Original price was: 300,00€.Current price is: 168,00€.

In Stock

Add to cart

Cart totals

Subtotal 2.838,55€
Shipping
Calculate shipping
Total 2.838,55€
Proceed to checkout