×Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Sump Fiat 500 Fiat 126 light alloy Giannini NANNI with central air crossing way 3,5 liters. 1 × 109,50€
×Fiat 500 Fiat 126 NANNI stopping up the hole mechanical fuel pump part (for racing use). 2 × 29,50€
×Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm. 1 × 49,00€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA). 1 × 159,70€
×Fiat 500 D F L R Francis Lombardi dashboard with white instruments. 1 × 550,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. 1 × 1.095,00€
×Rings copper Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm - Ø 80 mm. H.1 mm. 1 × 15,80€
×Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. 1 × 1.095,00€
×Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension. 1 × 59,50€
Fiat 500 D F L R original new stub axle assembly complete (left and right, black color).
Fiat 500 D F L R new stub axle assembly complete (left and right, black color) are like the originals with the bronze bushings (no bearings) and one greaser.
400,00€Original price was: 400,00€.270,00€Current price is: 270,00€.
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
× Sump Fiat 500 Fiat 126 light alloy Giannini NANNI with central air crossing way 3,5 liters.
× Fiat 500 Fiat 126 NANNI stopping up the hole mechanical fuel pump part (for racing use).
× Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
× Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA).
× Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.
× Rings copper Fiat engine 700 cc. under cylinders with pistons Ø 79,5 mm - Ø 80 mm. H.1 mm.
× Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.
× Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension.
