Product Price Quantity Total
× Fiat 500 Giannini mahogany wood steering wheel with hub (satined spokes) Art. 0015 Fiat 500 Giannini mahogany wood steering wheel with hub (satined spokes) 269,00
269,00
× Spring Fiat 500 F L reinforced for engine. Art. 0451 Spring Fiat 500 F L reinforced for engine. 18,50
74,00
× Cog belt reinforced for our drive pulley set 0200 and 0201. Art. 0202 Cog belt reinforced for our drive pulley set 0200 and 0201. 39,50
39,50
× Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. Art. 0159 Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. 279,00
558,00
× Fiat 500 F/L/R original Fiat complete driveshaft  set. (Very high quality). Art. 0121 Fiat 500 F/L/R original Fiat complete driveshaft set. (Very high quality). 185,00
1.110,00
× Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P Art. 0215 Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P 397,00
397,00
× Sump gasket Fiat 500 Fiat 126. Art. 0436 Sump gasket Fiat 500 Fiat 126. 8,90
44,50
× Fiat  500 R  Fiat 126 kit suspension motor rubbers and reinforced spring. Art. 0452K Fiat 500 R Fiat 126 kit suspension motor rubbers and reinforced spring. 29,85
29,85
× Fiat 500 F L R  Fiat 126 original drive shaft flange. Art. 0121D Fiat 500 F L R Fiat 126 original drive shaft flange. 19,50
97,50
× Small Giannini enamel emblem, 26 mm high Art. 0536 Small Giannini enamel emblem, 26 mm high 14,80
29,60
× Fiat 126 personal steering head. Art. 0489T Fiat 126 personal steering head. 14,80
29,60
× Jaeger/Smith rev. counter cable complete, connection diam. 12 mm. Art. 0806 Jaeger/Smith rev. counter cable complete, connection diam. 12 mm. 169,00
169,00
× Fiat 500 Fiat 126  short wipers set for parallel wiper stayrod.(stainless steel). Art. 0821A Fiat 500 Fiat 126 short wipers set for parallel wiper stayrod.(stainless steel). 27,00
27,00
× Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) Art. 0152 Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) 99,00
99,00
× Abarth lapel big enamel emblem 28,5 mm high. Art. 0519 Abarth lapel big enamel emblem 28,5 mm high. 9,70
19,40
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm Art. 0177 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm 39,00
39,00
× Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI. Art. 0387 Cover push rod tappet Fiat 500 Fiat 126 modified set NANNI. 89,80
89,80
× Timing chain set Fiat 500 Fiat 126 Fiat  Giardiniera high quality. Art. 0255 Timing chain set Fiat 500 Fiat 126 Fiat Giardiniera high quality. 29,80
29,80
× Twin-choke horizontal Weber 40 DCOE carburettor. Art. 0160 Twin-choke horizontal Weber 40 DCOE carburettor. 499,00
499,00
× Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. Art. 0387S Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. 99,80
99,80

You may be interested in…

Art. 0152 - Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) - Fiat 500 air filter cap light alloy Giannini Abarth (Pipe diam. 60 mm.)
Art. 0152

Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.)

Fiat 500 air filter cap light alloy Giannini Abarth (Pipe diam. 60 mm.)

99,00

In Stock

Add to cart
Art. 0153 - Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm - Cone-shaped alloy pipe from air filter
cap Art. 0152 to carburettor Ø 28 mm. (Diam. 60 mm. to 28 mm.)
Art. 0153

Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm

Cone-shaped alloy pipe from air filter cap Art. 0152 to carburettor Ø 28 mm. (Diam. 60 mm. to 28 mm.)

29,75

In Stock

Add to cart
Art. 0387K - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. - Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.
Art. 0387K

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set.

19,00

In Stock

Add to cart
Art. 0536 - Small Giannini enamel emblem, 26 mm high - Small Giannini enamel emblem 26 mm high.
Art. 0536

Small Giannini enamel emblem, 26 mm high

Small Giannini enamel emblem 26 mm high.

14,80

In Stock

Add to cart
Art. 0256 - Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat - Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.
Art. 0256

Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat

Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.

Original price was: 500,00€.Current price is: 249,00€.

In Stock

Add to cart
Art. 0454 - Cover oil filter centrifugal Fiat 500 Fiat 126 Giannini. - Cover centrifugal oil filter Fiat 500 Fiat 126 Giannini with oil ring.
Art. 0454

Cover oil filter centrifugal Fiat 500 Fiat 126 Giannini.

Cover centrifugal oil filter Fiat 500 Fiat 126 Giannini with oil ring.

59,00

In Stock

Add to cart
Art. 0805 - Rev. counter drive unit for distributor - Rev. counter drive unit for distributor
Art. 0805

Rev. counter drive unit for distributor

Rev. counter drive unit for distributor

399,00

In Stock

Add to cart
Art. 0256P - Oil pump new for Fiat 126. - Fiat 126 new oil pump.
Art. 0256P

Oil pump new for Fiat 126.

Fiat 126 new oil pump.

119,00

In Stock

Add to cart
Art. 0176V - Rubber  ring Viton for inlet manifold alloy spacer. - Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.
Art. 0176V

Rubber ring Viton for inlet manifold alloy spacer.

Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.

Original price was: 9,80€.Current price is: 6,80€.

In Stock

Add to cart
Art. 0142 - Admission  pipe light alloy NANNI with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100 R and Fiat 126. - NANNI light alloy admission pipe with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100R and Fiat 126.
Art. 0142

Admission pipe light alloy NANNI with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100 R and Fiat 126.

NANNI light alloy admission pipe with net (32/35 mm. Ø) Carburettor Lancia Fulvia, Fiat 124, 1100R and Fiat 126.

Original price was: 58,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0519 - Abarth lapel big enamel emblem 28,5 mm high. - Abarth lapel big enamel emblem 28,5 mm high.
Art. 0519

Abarth lapel big enamel emblem 28,5 mm high.

Abarth lapel big enamel emblem 28,5 mm high.

9,70

In Stock

Add to cart
Art. 0144 - Admission  pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000. - NANNI light alloy admission pipe with net (45 mm. Ø) for carburettor Weber DCOE, Dell’Orto DHLA.
Art. 0144

Admission pipe light alloy NANNI with net (45 mm. Ø) for carburettor Alfa Giulia 1750/2000.

NANNI light alloy admission pipe with net (45 mm. Ø) for carburettor Weber DCOE, Dell’Orto DHLA.

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0178A - Fiat 126 carburettor original thermic spacer. - Fiat 126 carburettor original thermic spacer.
Art. 0178A

Fiat 126 carburettor original thermic spacer.

Fiat 126 carburettor original thermic spacer.

25,00

In Stock

Add to cart
Art. 0379 - Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain. - Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.
Art. 0379

Ring steel Fiat 500 Fiat 126 for crankshaft oil , side chain.

Ring steel Fiat 500 Fiat 126 for crankshaft oil, side chain.

14,80

In Stock

Add to cart
Art. 0276 - Sump Fiat 500 Fiat 126 NANNI light alloy  4 liters with demountable bottom. - Fiat 500 Fiat 126 sump NANNI light alloy 4 liters with demountable bottom.
Art. 0276

Sump Fiat 500 Fiat 126 NANNI light alloy 4 liters with demountable bottom.

Fiat 500 Fiat 126 sump NANNI light alloy 4 liters with demountable bottom.

Original price was: 350,00€.Current price is: 189,00€.

In Stock

Add to cart
Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0146 - Fiat 500 Fiat 126 steel admission pipe with net for  original carburettor. - Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.
Art. 0146

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

59,50

In Stock

Add to cart
Art. 0154 - Fiat 500 Abarth carburettor Solex 32/34 PBIC light alloy air cap. - Fiat 500 Abarth light alloy air cap for carburettors Solex 32 PBCI and 34 PBCI.
Art. 0154

Fiat 500 Abarth carburettor Solex 32/34 PBIC light alloy air cap.

Fiat 500 Abarth light alloy air cap for carburettors Solex 32 PBCI and 34 PBCI.

278,00

Temporarily Unavailable

Read more
Art. 0452C - Fiat 500 Fiat 126 front engine mounting. - Fiat 500 Fiat 126 front engine mounting.
Art. 0452C

Fiat 500 Fiat 126 front engine mounting.

Fiat 500 Fiat 126 front engine mounting.

8,90

In Stock

Add to cart
Art. 0121A - Fiat 500 F L R Fiat 126 elastic joint. - Fiat 500 F L R Fiat 126 elastic joint.
Art. 0121A

Fiat 500 F L R Fiat 126 elastic joint.

Fiat 500 F L R Fiat 126 elastic joint.

25,00

In Stock

Add to cart
Art. 0204 - NANNI dynamo pulley. - NANNI dynamo pulley.
Art. 0204

NANNI dynamo pulley.

NANNI dynamo pulley.

88,75

In Stock

Add to cart
Art. 0270 - Sump Fiat 500 Fiat 126 light alloy Giannini NANNI with central air crossing way 3,5 liters. - Fiat 500 Fiat 126 sump Giannini NANNI light alloy with central air crossing way 3,5 liters.
Art. 0270

Sump Fiat 500 Fiat 126 light alloy Giannini NANNI with central air crossing way 3,5 liters.

Fiat 500 Fiat 126 sump Giannini NANNI light alloy with central air crossing way 3,5 liters.

Original price was: 200,00€.Current price is: 109,50€.

In Stock

Add to cart
Art. 0387S - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings. - Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.
Art. 0387S

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 modified set NANNI with silicon rubber rings.

Cover push rod tappet Fiat 500 Fiat 126 Fiat Panda 30 NANNI modified set with silicon rubber rings.

Original price was: 200,00€.Current price is: 99,80€.

In Stock

Add to cart
Art. 0822 - Arm wiper Fiat 500 F second type and Fiat 500 L R Fiat 126. - Arm wiper Fiat 500 F second model and Fiat 500 L R Fiat 126 stainless steel. (Large 7 mm.)
Art. 0822

Arm wiper Fiat 500 F second type and Fiat 500 L R Fiat 126.

Arm wiper Fiat 500 F second model and Fiat 500 L R Fiat 126 stainless steel. (Large 7 mm.)

19,50

In Stock

Add to cart
Art. 0159A - Fiat 126 Original pipe over the carburettor Weber 28 IMB. - Fiat 126 Original pipe over the carburettor Weber 28 IMB.
Art. 0159A

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

Fiat 126 Original pipe over the carburettor Weber 28 IMB.

29,50

In Stock

Add to cart
Art. 0176 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)
Art. 0176

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm.

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. (Weber 40 DCOE , Dell’Orto 40 DHLA, Solex …)

Original price was: 60,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0203 - NANNI motor pulley with oil centrifuge. - NANNI motor pulley with oil centrifuge.
Art. 0203

NANNI motor pulley with oil centrifuge.

NANNI motor pulley with oil centrifuge.

139,50

In Stock

Add to cart
Art. 0205 - NANNI alternator pulley. - NANNI alternator pulley.
Art. 0205

NANNI alternator pulley.

NANNI alternator pulley.

98,75

In Stock

Add to cart
Art. 0820 - Fiat 500 Fiat 126 Abarth parallel wiper stay rod stainless steel. - Fiat 500 Fiat 126 Abarth parallel wiper stay rod stainless steel.
Art. 0820

Fiat 500 Fiat 126 Abarth parallel wiper stay rod stainless steel.

Fiat 500 Fiat 126 Abarth parallel wiper stay rod stainless steel.

79,00

In Stock

Add to cart
Art. 0136 - Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. - Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).
Art. 0136

Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.

Fiat 500 Fiat 126 NANNI inlet manifold for horizontal twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000).

Original price was: 250,00€.Current price is: 144,00€.

In Stock

Add to cart
Art. 0453 - Cover oil filter centrifugal Fiat 500 Fiat 126 Abarth. - Cover centrifugal oil filter Fiat 500 Fiat 126 Abarth with oil ring.
Art. 0453

Cover oil filter centrifugal Fiat 500 Fiat 126 Abarth.

Cover centrifugal oil filter Fiat 500 Fiat 126 Abarth with oil ring.

59,00

In Stock

Add to cart
Art. 0271 - Sump Fiat 500 Fiat 126 NANNI light alloy 3,5 liters. - Fiat 500 Fiat 126 sump NANNI light alloy 3,5 l.
Art. 0271

Sump Fiat 500 Fiat 126 NANNI light alloy 3,5 liters.

Fiat 500 Fiat 126 sump NANNI light alloy 3,5 l.

Original price was: 200,00€.Current price is: 89,50€.

In Stock

Add to cart

Cart totals

Subtotal 3.750,35
Shipping
Calculate shipping
Total 3.750,35