×Bearings conrods Fiat 500 Fiat 126 STD. 1 × 24,00€
×Fiat 500 Fiat 126 Fiat Giardiniera front brake rotors for conversion kit 10” 3 × 140,00€
×Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. 1 × 298,50€
×Mount engine Fiat 500 Fiat 126 0,20 mm. side flywheel. 2 × 69,50€
×NANNI motor pulley with oil centrifuge. 4 × 139,50€
×Fiat 500 My car Francis Lombardi fiberglass dashboard for instruments, hole Ø 100 mm. 4 × 169,00€
×Fiat 500 front brake rotor conversion kit for 12” steel wheels. 2 × 499,00€
×Cylinder Fiat 500 R Fiat 126 Ø 73,5 mm, h. 80 mm. 595 cc. 1 × 89,50€
×Fiat 500 D F L R Francis Lombardi My Car dashboard with black instruments . 5 × 595,00€
×Conrods H beam Fiat 500 Fiat 126 steel lenght 118 mm. 3 × 215,00€
×Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. 1 × 1.095,00€
×Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. 3 × 89,00€
×Valve cover cap Fiat 500 D with Giannini plate for our art. 0263. 1 × 29,50€
×Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. 1 × 144,00€
×Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). 2 × 19,00€
×Silicon rubber rings Fiat 500 Fiat 126 Fiat Giardiniera for rod tappet set. 2 × 19,00€
×Fiat 500 D F L R Francis Lombardi My Car dashboard with black instruments. 4 × 550,00€
×Fiat 500 D F L R Francis Lombardi dashboard with white instruments. 2 × 550,00€
×Head gasket Fiat 500 Fiat 126 NANNI copper for 650 cc. engine 77 mm bore, h. 6/10 mm. 1 × 17,50€
×Brake pad set Fiat 500 Fiat 126 for front brake rotorconversion kit 12-13”. 1 × 39,50€
×Mount engine Fiat 500 Fiat 126 std. side flywheel. 1 × 69,50€
×Fiat 126 Fiat Giardiniera 10”-12”-13” wheels Brembo front brake rotor conversion kit. 1 × 699,00€
×Pierburg electric fuel pump. (pressure bar 0,2) 1 × 59,50€
×Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. 1 × 250,00€
×Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high. 1 × 32,00€
×Fiat 500 F L R red chess pattern capote. 1 × 59,00€
×Fiat 500 F L R Giannini new fuel tank. 1 × 169,00€
×Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension. 1 × 59,50€
×Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P. 2 × 397,00€
×Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes. 1 × 79,00€
×Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat 1 × 249,00€
×Fiat 500 Fiat 126 Abarth stopping up the hole mechanical fuel pump part (for stradal use). 1 × 78,50€
×Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB) 3 × 79,00€
×Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA). 2 × 159,70€
Fiat 500 F L (R first series ) complete brackets kit to raise the upper trapeze of the front suspension.
Fiat 500 F L and 500 R first series, complete brackets kit to raise the upper trapeze of the front suspension.( for the articles 0460-0461-0479). Distance between the holes of the trapeze 90 mm.
90,00€Original price was: 90,00€.59,50€Current price is: 59,50€.
Fiat 500 F L R Little brake booster. It’s indispensable for brake rotor conversion.
Fiat 500 F L R little brake booster. It’s indispensable for brake rotor conversion. Braking power is greater than 30%. Our brake booster is different into the interior, but is the same into the exterior.
200,00€Original price was: 200,00€.119,00€Current price is: 119,00€.
Questo sito utilizza cookie, anche di terze parti, per migliorare l'esperienza di navigazione. Se vuoi saperne di più clicca qui. Chiudendo questo banner acconsenti all'uso dei cookie. OK
× Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.
× Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm.
× Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 650 cc). 10 mm. high.
× Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension.
× Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P.
× Fiat 500 Fiat 126 Abarth stopping up the hole mechanical fuel pump part (for stradal use).
× Valve cover Fiat 500 F L R Fiat 126 light alloy NANNI .(perfect for original carburetor Weber 28 IMB)
× Inlet manifold NANNI two conduits for twin-choke carburettor Ø 40-45-48 mm. (Weber DCOE, Dell'Orto DHLA).
× Steel plate Fiat 500 F L NANNI to reinforce the cylinder block (for 700 cc). 12 mm.high.
× Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P
× Head gasket Fiat 500 Fiat 126 NANNI copper for 695/704 cc. engines 79,5/80 mm. bore, h. 6/10 mm.
