Product Price Quantity Total
× Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. Art. 0136 Fiat 500 Fiat 126 inlet manifold NANNI for horizontal twin-choke carburettor Ø 40-45-48 mm. 144,00€
144,00€
× Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. Art. 0179 Fiat 126 Fiat 500 Giardiniera front brake rotor conversion kit. 298,50€
298,50€
× Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. Art. 0380 Mount engine steel Fiat 500 Fiat 126 std. NANNI side chain. 89,00€
89,00€
× Fiat 500 Fiat 126 strut mount. Art. 0460A Fiat 500 Fiat 126 strut mount. 22,00€
22,00€
× Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm) Art. 0706 Fiat 500 L Abarth fiberglass instrument binnacle (instruments Ø 80 mm) 129,00€
129,00€
× Mount engine Fiat 500 Fiat 126 std. side flywheel. Art. 0384 Mount engine Fiat 500 Fiat 126 std. side flywheel. 69,50€
69,50€
× Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. Art. 0176 Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 40 mm. 35,00€
35,00€
× Twin-choke horizontal Weber 40 DCOE carburettor. Art. 0160 Twin-choke horizontal Weber 40 DCOE carburettor. 499,00€
499,00€
× Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). Art. 0292B Bushing crankshaft Fiat 500 Fiat 126 (side flywheel). 19,00€
19,00€
× Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. Art. 0468 Fiat 500 Fiat 126 upper set (rubber and steel) for rear spring. 16,00€
16,00€
× Fiat 500 Fiat 126 kit twin-choke Ø 32 mm horizontal carburettor with manifold and alloy admission pipe. Art. 0173 Fiat 500 Fiat 126 kit twin-choke Ø 32 mm horizontal carburettor with manifold and alloy admission pipe. 830,00€
830,00€
× Fiat 500 F/L/R original Fiat complete driveshaft set. (Very high quality). Art. 0121 Fiat 500 F/L/R original Fiat complete driveshaft set. (Very high quality). 185,00€
185,00€
× Fiat 500 F L R Fiat 126 original drive shaft flange. Art. 0121D Fiat 500 F L R Fiat 126 original drive shaft flange. 19,50€
39,00€
× Fiat 500 R Fiat 126 kit suspension motor rubbers and reinforced spring. Art. 0452K Fiat 500 R Fiat 126 kit suspension motor rubbers and reinforced spring. 29,85€
29,85€
× Abarth plate for valve cover cap Fiat 500 D. Art. 0268 Abarth plate for valve cover cap Fiat 500 D. 9,80€
19,60€
× Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. Art. 0472 Shock absorber Fiat 500 Fiat 126 NANNI shorted racing gas rear reinforced , with special rubbers. 98,00€
98,00€
× Valve cover Fiat 500 Fiat 126 Giannini light alloy. Art. 0263 Valve cover Fiat 500 Fiat 126 Giannini light alloy. 89,00€
89,00€
× NANNI alternator pulley. Art. 0205 NANNI alternator pulley. 98,75€
98,75€
× Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. Art. 0288B Steel plate Nanni 2,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 13,00€
13,00€
× Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) Art. 0152 Fiat 500 light alloy air filter cap Giannini Abarth ( pipe diam. 60 mm.) 99,00€
99,00€
× Fiat 126 Original pipe over the carburettor Weber 28 IMB. Art. 0159A Fiat 126 Original pipe over the carburettor Weber 28 IMB. 29,50€
29,50€
× Oil pump new for Fiat 126. Art. 0256P Oil pump new for Fiat 126. 119,00€
119,00€
× Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. Art. 0288A Steel plate Nanni 1,5 mm. high, to reinforce the cylinder block 740 cc. with pistons diam. 82 mm. 11,00€
11,00€

You may be interested in…

Art. 0143 - Admission pipe light alloy NANNI with net (40 mm. Ø) for carburettor Alfa Romeo Giulia. - NANNI light alloy admission pipe with net (40 mm. Ø) for corburettor Weber DCOE, Dell’Orto DHLA.
Art. 0143

Admission pipe light alloy NANNI with net (40 mm. Ø) for carburettor Alfa Romeo Giulia.

NANNI light alloy admission pipe with net (40 mm. Ø) for corburettor Weber DCOE, Dell’Orto DHLA.

Original price was: 58,00€.Current price is: 35,00€.

In Stock

Add to cart
Art. 0488 - Fiat 500 F L (R first series ) complete brackets kit to raise the upper trapeze of the front suspension. - Fiat 500 F L and 500 R first series, complete brackets kit to raise the upper trapeze of the front suspension.( for the articles 0460-0461-0479). Distance between the holes of the trapeze 90 mm.
Art. 0488

Fiat 500 F L (R first series ) complete brackets kit to raise the upper trapeze of the front suspension.

Fiat 500 F L and 500 R first series, complete brackets kit to raise the upper trapeze of the front suspension.( for the articles 0460-0461-0479). Distance between the holes of the trapeze 90 mm.

Original price was: 90,00€.Current price is: 59,50€.

In Stock

Add to cart
Art. 0176V - Rubber ring Viton for inlet manifold alloy spacer. - Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.
Art. 0176V

Rubber ring Viton for inlet manifold alloy spacer.

Viton rubber ring for inlet manifold alloy spacer. ( 57x47x5 mm.)High quality.

Original price was: 9,80€.Current price is: 6,80€.

In Stock

Add to cart
Art. 0488B - Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension. - Fiat 500R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension ( for the articles 0460-0461-0479). Distance between the holes of the trapeze 107 mm.
Art. 0488B

Fiat 500 R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension.

Fiat 500R second series and Fiat 126 complete brackets kit to raise the upper trapeze of the front suspension ( for the articles 0460-0461-0479). Distance between the holes of the trapeze 107 mm.

Original price was: 90,00€.Current price is: 59,50€.

In Stock

Add to cart
Art. 0465 - Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm. - Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.
Art. 0465

Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.

Fiat 500 Fiat 126 lowered rear coil spring h. 19 cm.

Original price was: 70,00€.Current price is: 45,00€.

In Stock

Add to cart
Art. 0213 - Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.
Art. 0213

Fiat 500 Fiat 126 modified timing case cover NANNI with support to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover with support NANNI to connect the oil cooler must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0186 - Fiat 500 Fiat 126 Fiat Giardiniera brake rotors for conversion kit 12”-13”. - Fiat 500 Fiat 126 Fiat Giardiniera brake rotors for conversion kit 12”-13”.
Art. 0186

Fiat 500 Fiat 126 Fiat Giardiniera brake rotors for conversion kit 12”-13”.

Fiat 500 Fiat 126 Fiat Giardiniera brake rotors for conversion kit 12”-13”.

68,75€

In Stock

Add to cart
Art. 0289 - Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke. - Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.
Art. 0289

Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.

Crankshaft Fiat 500 Fiat 126 Abarth 595 SS forged and balanced, coppery same the original, steel made, with 70 mm. stroke.

1.095,00€

In Stock

Add to cart
Art. 0189 - Fiat 500 F L R Little brake booster. It’s indispensable for brake rotor conversion. - Fiat 500 F L R little brake booster. It’s indispensable for brake rotor conversion. Braking power is greater than 30%. Our brake booster is different into the interior, but is the same into the exterior.
Art. 0189

Fiat 500 F L R Little brake booster. It’s indispensable for brake rotor conversion.

Fiat 500 F L R little brake booster. It’s indispensable for brake rotor conversion. Braking power is greater than 30%. Our brake booster is different into the interior, but is the same into the exterior.

Original price was: 200,00€.Current price is: 119,00€.

In Stock

Add to cart
Art. 0328 - Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders. - Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).
Art. 0328

Piston-liner kit Fiat 126 740 cc. Ø 82 mm for up-grading the engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders.

Piston-liner kit 740 cc, Ø 82 mm for up-grading Fiat 126 engine (for this item need to buy art. 0293a and art. 0429). NANNI cylinders don’t require the head gasket).

Original price was: 690,00€.Current price is: 339,00€.

In Stock

Add to cart
Art. 0154 - Fiat 500 Abarth carburettor Solex 32/34 PBIC light alloy air cap. - Fiat 500 Abarth light alloy air cap for carburettors Solex 32 PBCI and 34 PBCI.
Art. 0154

Fiat 500 Abarth carburettor Solex 32/34 PBIC light alloy air cap.

Fiat 500 Abarth light alloy air cap for carburettors Solex 32 PBCI and 34 PBCI.

278,00€

Temporarily Unavailable

Read more
Art. 0256 - Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat - Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.
Art. 0256

Timing case cover Fiat 500 R Fiat 126 original NANNI with NEW OIL PUMP original Fiat

Fiat 500 R Fiat 126 new original Nanni timing case cover with NEW OIL PUMP original Fiat.

Original price was: 500,00€.Current price is: 249,00€.

In Stock

Add to cart
Art. 0346 - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI . - Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).
Art. 0346

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI .

Cylinder Fiat 126 Ø 82 mm, high 80 mm. 740 cc. NANNI. ( this cylinder don’t require the head gasket but need the copper cylinder ring art. 0429).

99,50€

In Stock

Add to cart
Art. 0178 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)
Art. 0178

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 48 mm. (Weber 48 DCOE, Dell’Orto 48 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0193 - Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes. - Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.
Art. 0193

Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.

Fiat 500 Fiat 126 set of 4 high pressure aeronautical brake pipes.

Original price was: 140,00€.Current price is: 79,00€.

In Stock

Add to cart
Art. 0137 - Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head. - NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.
Art. 0137

Inlet manifold NANNI for twin-choke carburettor diam. 40-45-48 mm over Panda head.

NANNI inlet manifold for twin-choke carburettor Ø 40-45-48 mm. (Alfa Romeo Giulia, 1750, 2000) over Panda head.

Original price was: 250,00€.Current price is: 149,00€.

In Stock

Add to cart
Art. 0153 - Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm - Cone-shaped alloy pipe from air filter cap Art. 0152 to carburettor Ø 28 mm. (Diam. 60 mm. to 28 mm.)
Art. 0153

Cone-shaped alloy pipe from air filtercap Art. 0152 to carburettor Ø 28 mm

Cone-shaped alloy pipe from air filter cap Art. 0152 to carburettor Ø 28 mm. (Diam. 60 mm. to 28 mm.)

29,75€

In Stock

Add to cart
Art. 0215 - Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P - Fiat 500 Fiat 126 apply complete kit NANNI for oil cooler. For the oil cooler sizes see our art. 0217. The timing case must to be coupled with the original oil pump Fiat item 0256P
Art. 0215

Fiat 500 Fiat 126 apply complete kit for oil cooler NANNI. This timing case must to be coupled with the original oil pump Fiat item 0256P

Fiat 500 Fiat 126 apply complete kit NANNI for oil cooler. For the oil cooler sizes see our art. 0217. The timing case must to be coupled with the original oil pump Fiat item 0256P

Original price was: 600,00€.Current price is: 397,00€.

In Stock

Add to cart
Art. 0388 - Bearings conrods Fiat 500 Fiat 126 STD. - Bearings conrods Fiat 500 Fiat 126 STD.
Art. 0388

Bearings conrods Fiat 500 Fiat 126 STD.

Bearings conrods Fiat 500 Fiat 126 STD.

24,00€

In Stock

Add to cart
Art. 0290 - Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke. - Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced and coppery same the original Abarth, made of steel, with 76 mm stroke.
Art. 0290

Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced, coppery same the original, made of steel, with 76 mm stroke.

Crankshaft Fiat 500 Fiat 126 Abarth 695 original forged and balanced and coppery same the original Abarth, made of steel, with 76 mm stroke.

1.095,00€

In Stock

Add to cart
Art. 0536 - Small Giannini enamel emblem, 26 mm high - Small Giannini enamel emblem 26 mm high.
Art. 0536

Small Giannini enamel emblem, 26 mm high

Small Giannini enamel emblem 26 mm high.

14,80€

In Stock

Add to cart
Art. 0121A - Fiat 500 F L R Fiat 126 elastic joint. - Fiat 500 F L R Fiat 126 elastic joint.
Art. 0121A

Fiat 500 F L R Fiat 126 elastic joint.

Fiat 500 F L R Fiat 126 elastic joint.

25,00€

In Stock

Add to cart
Art. 0214 - Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P. - Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI .For the oil cooler sizes see art. 0217. The timing case must to be coupled with the original Fiat oil pump item 0256P.
Art. 0214

Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI. The timing case must to be coupled with the original oil pump Fiat item 0256P.

Fiat 500 Fiat 126 oil filter and cooler (complete kit) NANNI .For the oil cooler sizes see art. 0217. The timing case must to be coupled with the original Fiat oil pump item 0256P.

Original price was: 600,00€.Current price is: 397,00€.

In Stock

Add to cart
Art. 0183 - Brake pad set Fiat 500 Fiat 126 for front brake rotorconversion kit 12-13”. - Brake pad set Fiat 500 Fiat 126 for front brake rotor conversion kit 12-13”.
Art. 0183

Brake pad set Fiat 500 Fiat 126 for front brake rotorconversion kit 12-13”.

Brake pad set Fiat 500 Fiat 126 for front brake rotor conversion kit 12-13”.

39,50€

In Stock

Add to cart
Art. 0438 - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals. - Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.
Art. 0438

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

Gaskets engine Fiat 500 Fiat 126 unified set with oil seals.

39,80€

In Stock

Add to cart
Art. 0292 - Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke - Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke.
Art. 0292

Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke

Crankshaft Fiat 500 Fiat 126 new original 70 mm. stroke.

Original price was: 500,00€.Current price is: 298,00€.

In Stock

Add to cart
Art. 0212 - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P. - Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.
Art. 0212

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Fiat 500 Fiat 126 modified timing case cover NANNI with support and oil filter and must to be coupled with the original oil pump art. 0256P.

Original price was: 480,00€.Current price is: 250,00€.

In Stock

Add to cart
Art. 0269 - Giannini plate for valve cover cap Fiat 500 D. - Giannini plate for valve cover cap Fiat 500 D.
Art. 0269

Giannini plate for valve cover cap Fiat 500 D.

Giannini plate for valve cover cap Fiat 500 D.

9,80€

In Stock

Add to cart
Art. 0809 - Dashboard red light - Dashboard red light
Art. 0809

Dashboard red light

Dashboard red light

7,00€

In Stock

Add to cart
Art. 0460B - Fiat 500 Fiat 126 leaf spring buffer. - Fiat 500 Fiat 126 leaf spring buffer.
Art. 0460B

Fiat 500 Fiat 126 leaf spring buffer.

Fiat 500 Fiat 126 leaf spring buffer.

7,90€

In Stock

Add to cart
Art. 0329 - Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.). - Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.
Art. 0329

Piston-liner kit forged Fiat 126 740 cc. Ø 82 mm. for up-grading the engine. (NANNI cylinders height 80 mm.).

Forged piston-liner kit 740 cc, Ø 82 mm.for up-grading Fiat 126 engine. (NANNI cylinders height 80 mm. don’t require the head gasket, but need the copper rings our art. 0429.) We have the pistons with the compression height 25 mm. 28 mm. Please write in the notes the compression height of the pistons you require.

Original price was: 800,00€.Current price is: 429,00€.

In Stock

Add to cart
Art. 0177 - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm - Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)
Art. 0177

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm

Inlet manifold light alloy spacer NANNI for twin choke horizontal carburettor Ø 45 mm. (Weber 45 DCOE, Dell’Orto 45 DHLA, Solex…)

Original price was: 70,00€.Current price is: 39,00€.

In Stock

Add to cart
Art. 0178A - Fiat 126 carburettor original thermic spacer. - Fiat 126 carburettor original thermic spacer.
Art. 0178A

Fiat 126 carburettor original thermic spacer.

Fiat 126 carburettor original thermic spacer.

25,00€

In Stock

Add to cart
Art. 0159 - Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm. - Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB Ø 28 mm.
Art. 0159

Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB diam. 28 mm.

Fiat 500 R Fiat 126 carburettor new original Weber 28 IMB Ø 28 mm.

279,00€

In Stock

Add to cart
Art. 0466 - Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm. - Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.
Art. 0466

Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.

Fiat 500 Fiat 126 lowered reinforced rear coil spring h. 19 cm.

Original price was: 70,00€.Current price is: 45,00€.

In Stock

Add to cart
Art. 0267 - Valve cover cap Fiat 500 D with Giannini plate for our art. 0263. - Valve cover cap Fiat 500 D with Giannini plate for our art. 0263.
Art. 0267

Valve cover cap Fiat 500 D with Giannini plate for our art. 0263.

Valve cover cap Fiat 500 D with Giannini plate for our art. 0263.

29,50€

In Stock

Add to cart
Art. 0467 - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm. - Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.
Art. 0467

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Fiat 500 Fiat 126 racing lowered rear coil spring h. 17 cm.

Original price was: 80,00€.Current price is: 49,00€.

In Stock

Add to cart
Art. 0519 - Abarth lapel big enamel emblem 28,5 mm high. - Abarth lapel big enamel emblem 28,5 mm high.
Art. 0519

Abarth lapel big enamel emblem 28,5 mm high.

Abarth lapel big enamel emblem 28,5 mm high.

9,70€

In Stock

Add to cart
Art. 0808 - Dashboard green light - Dashboard green light
Art. 0808

Dashboard green light

Dashboard green light

7,00€

In Stock

Add to cart
Art. 0460 - Fiat 500 Fiat 126 special reverse “eye” front 5 leaf crossbow. - Fiat 500 Fiat 126 special reverse “eye” front 5 leaf crossbow.  (Made in Italy). The leaf spring lowers the car by 3 cm.
Art. 0460

Fiat 500 Fiat 126 special reverse “eye” front 5 leaf crossbow.

Fiat 500 Fiat 126 special reverse “eye” front 5 leaf crossbow.  (Made in Italy). The leaf spring lowers the car by 3 cm.

Original price was: 200,00€.Current price is: 119,00€.

In Stock

Add to cart
Art. 0146 - Fiat 500 Fiat 126 steel admission pipe with net for original carburettor. - Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.
Art. 0146

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

Fiat 500 Fiat 126 steel admission pipe with net for original carburettor.

59,50€

In Stock

Add to cart
Art. 0452C - Fiat 500 Fiat 126 front engine mounting. - Fiat 500 Fiat 126 front engine mounting.
Art. 0452C

Fiat 500 Fiat 126 front engine mounting.

Fiat 500 Fiat 126 front engine mounting.

8,90€

In Stock

Add to cart
Art. 0437 - Valve cover gasket Fiat 500 Fiat 126. - Valve cover gasket special Fiat 500 Fiat 126.
Art. 0437

Valve cover gasket Fiat 500 Fiat 126.

Valve cover gasket special Fiat 500 Fiat 126.

7,50€

In Stock

Add to cart

Cart totals

Subtotal 2.981,70€
Shipping
Calculate shipping
Total 2.981,70€
Proceed to checkout